TS110 error

[NYblue]

Bought a basket case TS110 and now have it running but shows error 29 EDC valve disconnected but this is top link draft control only
How do I turn the EDC function off

 

[forblue]

Has it got a small relay in fuse box marked with lift arms and or fuse fuse 14 if so remove and recheck..

 

[NYblue]

Yes there are two fuses that shows the lift arms one is 14 but when I removed it then the error changed to 67 which is bad #14 fuse

 

[forblue]

so what about relay, has this tractor had a different processor fitted at some time or had a different back-end fitted to change it from edc to manual, what was wrong to make it a basket case, as for turning off edc i think that cant be done as processor is different.

 

[NYblue]

I found a way to turn off the EDC using the diagnostic plug. Someone must have turned it on trying to clear the errors. Now I have no errors showing

 

[Combine Rescue]

If you done H8 do you have E24 or not?

 

[NYblue]

I did not do H8 but maybe someone before me did. The service book showed that that would enable EDC. I used H2 to disable the EDC and the errors went away. I rebuilt the Trans so now I want to try to Cal it

 

[Combine Rescue]

If you have controller with red and black plug do not H8.!!
The is no calibration for transmission.