Tub Feeder Wagon

vantage

Member
Location
Pembs
Can you elaborate a bit on the quote? Size, spec?

I had a price in the spring for a Siloking 22 cube twin auger, no conveyor just front corner and rear centre doors, bale augers (+£600:scratchhead:) wide angle pto etc was £33500. Decided to carry on with the old one a bit longer:bag:
One of the problems of a weak pound!
I have a Keenan paddle,the equivalent model new price now starts with a 4 apparently, not that I need or am inclined to change!
 

Jamer

Member
Location
Glos
One of the problems of a weak pound!
I have a Keenan paddle,the equivalent model new price now starts with a 4 apparently, not that I need or am inclined to change!
I think they are also subject to the noticeably exorbitant new machinery inflation: 3.5 years ago when we were buying the best price was a 25 cube Redrock with twin commercial axles, 2 speed gearbox, front conveyor, rear straights door and wide angle pto for £23k. Probably 50% dearer now.
 
I think they are also subject to the noticeably exorbitant new machinery inflation: 3.5 years ago when we were buying the best price was a 25 cube Redrock with twin commercial axles, 2 speed gearbox, front conveyor, rear straights door and wide angle pto for £23k. Probably 50% dearer now.
Definately
 

vantage

Member
Location
Pembs
Your joking? Ours was is a kenaan 380 and was 27k 2 years ago.
Well that’s what the service guy said! Haven’t priced one up for years, mine is a 160 which became a 340 and now a 345 I think. It only gets used in the winter so I hope it will last a good few years yet.
 

Martyn

Member
Location
South west
Thanks to @mo! we have a tub coming from cumbria next week, done three seasons work and retiring, its a very good condition strautmann 1451.

Hope the cows enjoy the outcome, thanks for everyones emails and advise. Must add i spoke to Kuhn and Shelbourne and after three weeks and a couple of calls chasing still no prices on the desk.
 

mo!

Member
Location
York
Thanks to @mo! we have a tub coming from cumbria next week, done three seasons work and retiring, its a very good condition strautmann 1451.

Hope the cows enjoy the outcome, thanks for everyones emails and advise. Must add i spoke to Kuhn and Shelbourne and after three weeks and a couple of calls chasing still no prices on the desk.
I hope it works out for you. I'll send you the address to send my commission to.
 

st piran

Member
Location
cornwall
Thanks to @mo! we have a tub coming from cumbria next week, done three seasons work and retiring, its a very good condition strautmann 1451.

Hope the cows enjoy the outcome, thanks for everyones emails and advise. Must add i spoke to Kuhn and Shelbourne and after three weeks and a couple of calls chasing still no prices on the desk.
Out of interest was the kuhn price from the local dealer up the road from you who also sells JCB and McCormick? Or further afield?
 

Martyn

Member
Location
South west
Out of interest was the kuhn price from the local dealer up the road from you who also sells JCB and McCormick? Or further afield?
Like knocking your head against a wall with them, i enquired about a bale trailer and changing out handler befor and never got prices back. we run severl bits of kuhn here, all from Hawkins and Buglers. You obviosly know who i am!!
 

st piran

Member
Location
cornwall
Like knocking your head against a wall with them, i enquired about a bale trailer and changing out handler befor and never got prices back. we run severl bits of kuhn here, all from Hawkins and Buglers. You obviosly know who i am!!
Ha, yes just checking I wasn’t the only one that find them hard work too buy something off! Yeah you went in where Mr T came out of I thought?
 

Forum statistics

Threads
156,372
Messages
3,576,943
Members
39,608
Latest member
Fryer Tuck

Events

Poynton Show
220 Park Ln, Poynton, Stockport, Cheshire
220 Park Ln, Poynton, Stockport SK12 1RQ, UK
Llangynidr Show
Llangynidr Village Hall, Crickhowell, Powys
Cwmcrawnon Road, Llangynidr, Crickhowell NP8 1LS, United Kingdom
Top