ucn or ycn

[davidroberts30]

not competing just i can never remember which points my plough has
ransomes tsr300
both are the shoe type and i think i've got the bigger type

is there a easy way to tell them apart

 

[wuddy]

not competing just i can never remember which points my plough has
ransomes tsr300
both are the shoe type and i think i've got the bigger type

is there a easy way to tell them apart

Stick a picture on easier for someone to identify!

 

[Bury the Trash]

not competing just i can never remember which points my plough has
ransomes tsr300
both are the shoe type and i think i've got the bigger type

is there a easy way to tell them apart

most obvious differance is that a ycn mouldboard is around 34 inches or so long from memory and the shin is different, ucn mouldboard is shorter.and no im not going outside looking tonight

 

[davidroberts30]

most obvious differance is that a ycn mouldboard is around 34 inches or so long from memory and the shin is different, ucn mouldboard is shorter.and no im not going outside looking tonight

Nor am i

 

[Bury the Trash]

ucn mouldboard is 34 inches long and ycn is 39 inches long ...

.my memory is carp.

 

[davidroberts30]

ucn mouldboard is 34 inches long and ycn is 39 inches long ...

.my memory is carp.

 

[Bury the Trash]

its not Ycn

looks like Ucn...

If so the Ucn mouldboard should be 34.5 inches at its longest point following the curve and 12 inches at its deepest/widest point.

...could alsio be Scn by the way that photo looks,if so then the frog is the same. so will the share and wing but the shin and board will be deeper but the board will be the same lengh as ucn one as a giude

 

[SMID]

Ucn