UK milling premiums up and away

Global wheat supply has seen some drastic cuts in recent forecasts. But there are also questions about the quality of the wheat, not just quantity.

In the UK, we are generally net importers of milling wheat and our key import origins are Canada and the EU. Canada’s crops have suffered from drought, and we await production estimates from Statistics Canada due out on Monday, but yesterday the IGC cut 4.0Mt from its Canadian production estimate, at 24.5Mt.

The IGC estimate is down 10.7Mt year-on-year and almost in line with that of the USDA (24.0Mt). The IGC also cut their EU-27 wheat production estimate, pegging it lower than that of the USDA, at 137.6Mt. Although, this does sit higher than the EU commissions EU-27 production estimate of 135.1Mt also updated yesterday.

Germany and France, both key import origins for UK wheat supply, have seen harvest delays this year. Initial indications of wheat quality in both countries suggest low specific weights, a key measure for milling wheat.

As a result of quality concerns and diminishing global supply, Paris milling wheat futures have jumped since early July. From 1 July to yesterdays close, the Dec-21 contract has risen €38.00/t. This has helped support UK feed wheat futures (Nov-21), gaining £23.30/t in the same time frame.

Will this keep milling wheat premiums supported?​

With milling wheat from key import origins looking tight, and prices on the continent supported, unsurprisingly our physical milling wheat prices have been strong.

Last Friday, bread wheat delivered to the North West (nearby) was quoted at £225.50/t, £22.00/t higher than the same time last year. This said, the premium over feed wheat (nearby futures) was slightly lower than the same time last year.

Premiums last year were stretched due to the lack of winter milling wheat plantings in Autumn 2019. In comparison to the previous 5-year average (2015/16-2019/20) premiums over feed wheat are still elevated.

Premiums%20graph%20GMD%2027%2008%202021-1.PNG


Today’s AHDB harvest progress report shows that winter wheat harvest still lags 2020 completion at 46% cut up to 24 August. The report also suggests milling wheat quality has slipped. Hagberg falling number (HFN) ranges between 250s and 300s, down from 260s-380s last week. Crucially, this still meets the threshold for high quality UK milling wheat (HFN greater than 250s). This said, similarly to those on the continent, the specific weights recorded are coming in slightly low at 73-77kg/hl. The requirement for full spec UK milling wheat is 76kg/hl.

With feed wheat futures supported it could squeeze the milling wheat premium. However, with potential quality issues in key producing countries, and a relatively unknown milling crop here in the UK, we could see some further support. Based on last Friday’s delivered survey, we can see we are still some way off the price ceiling for domestic milling wheat.

Import%20parity%20GMD%2027%2008%202021.PNG


UK milling premiums up and away
For information on price direction make sure to subscribe to Grain Market Daily’s and Market Report from our team.
 

Update on the Sustainable Farming Incentive pilot

  • 72
  • 0
Update on the Sustainable Farming Incentive pilot

Written by Lisa Applin

Webp.net-resizeimage-3.jpg


In July, we opened the applications window for farmers to join our Sustainable Farming Incentive pilot.

The Sustainable Farming Incentive is 1 of the 3 new environmental land management schemes. It sits alongside the future Local Nature Recovery and Landscape Recovery schemes.

Through the Sustainable Farming Incentive, farmers will be paid for environmentally sustainable actions – ones that are simple to do and do not require previous agri-environment scheme experience.

We are piloting the scheme to...
Top