Using a hill side combine on flat land.

[Brisel]

That and breaking down.

Depreciation too. Not bad computers though. Datavision was way ahead of its time. Sh1te otherwise.

 

[limestone brash]

You can change the deadband and sensitivity in the settings.

By deadband do you mean thats it’s possible to alter the degree of slope it doesn’t compensate for?
Our hillmaster always seems to over compensate in fields that are only very slightly sloping - i thiink it adjusts in increments

 

[Simon Chiles]

By deadband do you mean thats it’s possible to alter the degree of slope it doesn’t compensate for?
Our hillmaster always seems to over compensate in fields that are only very slightly sloping - i thiink it adjusts in increments

The deadband is the bit in the middle ( upright on the flat ) before it moves. Widening the deadband will mean that it can tilt slightly more before it starts to correct. After that it should move smoothly although you can also how fast it reacts as well.

 

[limestone brash]

how do i get into the settings to do this please?
Ours is a 2006 jd 9780i cts