Vaddy front pivot packer

MrNoo

Member
Arable Farmer
Location
Cirencester
Anyone had issue with the two main shafts seizing up (the ones that the wheels are bolted too) and tips or tricks to unseize them, got one that moves ever so slightly but other is tight. Would a press push them out? Dont really want to start cutting them out.
 

MrNoo

Member
Arable Farmer
Location
Cirencester
Yea should press out ok probably worn bushes allowing dirt in and siezing up won’t be that tight
Yes they are a tad worn, guessing the bushes are the same as the main central pin, one each end circa 1" wide. Taken off and being carted off to someone with a girt press so fingers crossed!
 

Make Tax Digital Software Poll

  • Quickbooks

    Votes: 33 16.6%
  • Sage

    Votes: 20 10.1%
  • Xero

    Votes: 92 46.2%
  • Other

    Votes: 54 27.1%

Man fined £300 for bonfire-related waste offences

  • 191
  • 0
Written by William Kellett from Agriland

court-640x360.jpg
A man has pleaded guilty at Newtownards Magistrates’ Court to waste offences relating to a bonfire next to the electrical sub-station on the Circular Road in Newtownards, Co. Down.

Gareth Gill (51) of Abbot’s Walk, Newtownards pleaded guilty to two charges under the Waste and Contaminated Land (Northern Ireland) Order 1997, for which he was fined £150 each and ordered to pay a £15 offender’s levy

On June 25, 2018, PSNI officers went to Gill’s yard, where they found a large amount of waste consisting of scrap wood, pallets, carpet and underlay.

Discussion with Northern Ireland Environment Agency (NIEA) officers confirmed the site...
Top