Vaderstad press Goole East Yorkshire to Bedford plenty of time.

[spikeislander]

As title vaderstad rexius press 6.3 m folding. From a tff member near goole East Yorkshire dn148pp to myself near Bedford mk437qg no rush so happy to wait for a good back load price. Pm me thanks

 

[spikeislander]

any takers/ ideas?

 

[mx110]

@Strawgalore

 

[Cjm]

@Derky

 

[Badshot]

Try k drury and sons

They took some tractors and straw to Scotland the other week. Might fit it in on another journey.

 

[Cjm]

Thinking about it Northern straw from Goole run a low loader. Text me if you need number

 

[Derky]

Now then, we come up North now and again when do you need it ?

 

[Strawgalore]

I'd have a go at that , il pm you ,

 

[spikeislander]

Cheers guys. In the next 4-5 weeks would do just to get it out of the way of the chap who we bought it off.
I can get a height of him as it has the extra set of tines on front so might be a bit higher but nothing to bad.
It's never been outside and is in superb condition which is why we got it so please avoid load chains across paint etc. I know all on here wouldn't but once had a new machine turn up and they had just took half the paint off wth them.
I think it will be ramps or low loader whoever does it.

 

[watson machinery]

We could do it for you no problem if you haven't sorted it already regards mark

 

[spikeislander]

Nothing sorted yet, so feel free to pm me a price and when you might want to do it and I'll see which works the best. Expecting a price from the two above so I'll go on price or what works best that seems the fairest.
Thankyou regards Damian

 

[spikeislander]

ok had a couple of quotes so all good if anyone else wants in pm me, dimensions for those who asked are as follows;
8m long
4m high with third row of tines down
and 3m wide.
I'll check with farmer when cheque is cleared and its then good to go.
thanks

 

[spikeislander]

Job sorted thanks all

 

[Andrew K]

@Derky

Can recommend Derek, good service.

 

[Derky]

Thanks Andrew.

 

[spikeislander]

All done thanks to mark Watson
Nice chap .
@watson machinery