Can anyone help? I have been trying unsuccessfully to fix a fault with the lift on my n121 valtra 2008 model. I have tried the local main dealer who does not seem interested in helping. The fault light does one flash then a pause then five flashes. I have even resorted to looking myself and have tested all the resistance of the solenoids and the condition of the plugs/electrical connections. Any help would be really appreciated as this has now been out of action for two weeks and i cannot seem to get anyone to come and look.
valtra n121 lift faults
- Thread starter andy_73
- Start date
john432
Member
- Location
- Carmarthenshire
Just a shot in the dark ..but don't a lot of different make of tractors use a Bosch based electronic rear lift control system? What does the 1: 5 flashes code mean on a Massey Ferguson? Might just be the same..
Stw88
Member
- Location
- Northumberland
is it just the auto power lift switch not working? there’s a plug under the cab on top of the block that sometimes a clean and a squirt of wd40 sometimes helps.
- Location
- North Devon
It’s usually the rocker switch with the auto control on it that needs replacing.
I was told our n121 has a sensor which is between the brake mechanism.
I’d be taking the plug off to give it a clean.
I was also told sometimes it needs adjusting and calibrating.
I’d be taking the plug off to give it a clean.
I was also told sometimes it needs adjusting and calibrating.
- Location
- North Devon
Did you get this fault fixed?
- Tags
- massey massey ferguson valtra