Valtra Smart touch isoxml data exchange

[T C]

Trying to get data off smart touch.
Can get maps and jobs on OK.
Jobs can be created and run but don't seem to export by USB.
The other issue we are having is section control settings seem to revert each time you stop the tractor.

 

[welshfarmer]

The Massey needs taskdoc pro to export coverage, dont know if it's the same for Valtra but you would expect it to be part of the variable rate/section control package

 

[T C]

Got taskdoc pro unlocked on the tractor.

 

[Pint2]

Trying to get data off smart touch.
Can get maps and jobs on OK.
Jobs can be created and run but don't seem to export by USB.
The other issue we are having is section control settings seem to revert each time you stop the tractor.

It's a nightmare. Don't think you can export data like a coverage map and job details etc.
Maybe someone knows otherwise but we couldn't.
In the end we chucked out the smart touch extend ,replaced it with a topcon x25 which does churn out all the info you need.

 

[T C]

Finding that out now! On video it looks like it can be done over the air.
It seems like the software is not finished, my 10 year old trimble screens can do it not problem.

 

[T C]

There doesn't seem to be a way to delete coverage jobs.
To delete coverage we have to delete all fields and waylines and re load them.

 

[Farma Parma]

As us Massey lads know too well AGCO & software have issues cert on the massey side anyways & that smart touch screen aint that much different on the massey so maybes
they both need a well schooled 9yr old to reprogram them eh.
Trimble Gudiance is very good & stable software i must say.

 

[T C]

As us Massey lads know too well AGCO & software have issues cert on the massey side anyways & that smart touch screen aint that much different on the massey so maybes
they both need a well schooled 9yr old to reprogram them eh.
Trimble Gudiance is very good & stable software i must say.

Can't believe nobody has pushed AGCO to do better.
I have been told that the software is quite like Fendt in basic build.
I would have thought the iso job recording integration will be common on all AGCO kit

 

[welshfarmer]

Looks like a frustrating future awaits when the 8s arrives, going to miss my old c3000 screen and I know it is far from perfect but I like it.