Hello, I got a Vicon RF 135 balepack model 2006.
I got a problem with the wrapping table. It does not turn the bale as the satellite is wrapping around the bale.
I got a new print plate and EPROM. Everything works except the wrapping table does not turn. I also changed the electric actuator for the wrapping table but it didn’t change anything. The control panel does not come up with any faults. I am running out of ideas what could be the problem so I wanted to see if anyone has had this problem as well.
In hope of someone could help
- Ingi
I got a problem with the wrapping table. It does not turn the bale as the satellite is wrapping around the bale.
I got a new print plate and EPROM. Everything works except the wrapping table does not turn. I also changed the electric actuator for the wrapping table but it didn’t change anything. The control panel does not come up with any faults. I am running out of ideas what could be the problem so I wanted to see if anyone has had this problem as well.
In hope of someone could help
- Ingi
