Wanted ,jd wheel spacers

[Will 1594]

Looking for a set of wheel spacers for old 50 series , 150 hub ,8 stud

 

[MF-ANDY]

@moorgate
Wrong series but anything like yours?

 

[4440]

Have seen a set turn on FB Marketplace about 3cweeks ago, can not find it now.

 

[Will 1594]

Have seen a set turn on FB Marketplace about 3cweeks ago, can not find it now.

14 sets will turn up when found some ,have 2 leads on some ,at minute , if not will just get lazer man to cut some rings to bolt to the wheel disc he cut for me

 

[Tractortech]

14 sets will turn up when found some ,have 2 leads on some ,at minute , if not will just get lazer man to cut some rings to bolt to the wheel disc he cut for me

A plain steel ring won't carry the weight safely. You need a hub in the centre to carry the weight, the screws are only for clamping!!

 

[Will 1594]

A plain steel ring won't carry the weight safely. You need a hub in the centre to carry the weight, the screws are only for clamping!!

Have made an adapter plate , from Jd hub to the ten stud profile of the front axle hub , so I can put the big tractor front wheels on the back of the small tractor ,
Was going to cut some ten stud rings to step it off. , not on the small 8 stud 150 hole bit ,

 

[Honest john]

Looking for a set of wheel spacers for old 50 series , 150 hub ,8 stud

I will have a look I did have some.

 

[nick...]

Atkins farm machinery at dereham might be worth a call.his sheds are an aladins cave of all manor of stuff going back years
nick...

 

[Will 1594]

Nick young had some and all bolts and correct washers