Wanted pair of front rims to suit a Ford 8100 / 8600

Discussion in 'Classic Machinery' started by RScapriman, Oct 10, 2018.

  1. RScapriman

    RScapriman New Member

    Hi all I am looking for a pair of front wheel rims as fitted to the Ford 8100 and 8600 tyres are not important, also looking for a very good bonnet to suit a Ford 6700 / 7700 or 8100.
     
  2. Nearly

    Nearly Member

    Location:
    North of York
    JLTate likes this.
  3. RScapriman

    RScapriman New Member

    Yes buddy sorry 2wd
     
  4. JLTate

    JLTate Member

    Got a pair of 7.50 x 18’s from a Ford 7000.
     
  5. RScapriman

    RScapriman New Member

    Thank you buddy but got to be 10 x16 rims with 1100 x 16 tyres which I already have, and have to vbe the correct offset as per Ford 8100, Ford 8600 or ford 8700 2wd or I guess any of the TW range in 2wd format.
    Many thanks Len
     
  6. RScapriman

    RScapriman New Member

    Hi do you have a photo and price please.
    Regards Len
     
  7. RScapriman

    RScapriman New Member

    Hi buddy, where are you based and what tractor did it come off?
    Regards Len
     
  8. Hi came as a spare with an 8100 based in South Devon
     
  9. RScapriman

    RScapriman New Member

    I see I am in Wiltshire so quite some way from you, I am interested but am guessing carriage would it very expensive.
    Do you still own the 8100?
     
  10. Einstien

    Einstien Member

    Got two on the front of my 8100 ;-)
     
  11. Einstien

    Einstien Member

  12. RScapriman

    RScapriman New Member

    nice tractor buddy
     
  13. Einstien

    Einstien Member

    Well if you give it a good home I'll happily do you a good deal on it LoL - I'm starting to need 4wd in the horrible clay ground round here! LoL
     
  14. RScapriman

    RScapriman New Member

    Hi, could you please send me some more photos of it including plenty of the cab both inside and out to rscapriman2631@gmail.com.
    Believe me it would have a great home lol, what sort of price were you looking for?
    Regards Len.
     
  15. No the 8100 sold a while ago... I guess it would need to go on a pallet?
     
  16. Einstien

    Einstien Member

    If your in Wilts just stop in next time you head north, no rush, it's very very much a work horse and while all working, it's in very much work condition the cab being let down where years ago TH Whites did the dual power shaft and cracked the fiberglass roof above the doors so has a corroded bit at top of door shuts, rest is solid... But just stop in and have look somewhen. Have photos from it all in 3 pieces a couple years back as I did the dual power shaft again with genuine shaft and new hub, had the insides all looked over by a whites mechanic (did the oil pump idle gear and boss too) but the engine is not far off needing an overhaul as I am giving it lots of work....

    I'm in Gloucestershire, ex Devizes Wilts

    On a plus side according to the clock it's only done 150hrs!! :)
     
    Last edited: Oct 18, 2018
    Nearly likes this.
  17. RScapriman

    RScapriman New Member

    Where in Glos buddy, would be interested could you give me some idea of price.
    Years ago my father worked on a large farm in Gloucestershire and also drove the large tractor in busy times they had 2 8100,s wish I could remember their Reg No, s this is the reason I am keen on one.
    Regards Len
     

Share This Page