- Location
- Moreton-in-Marsh, Glos
DefinitelyView attachment 909147
are these ready for a change would you say
DefinitelyView attachment 909147
are these ready for a change would you say
Yes, the bearing were all about gone to be fair so worth a changeNow you have spares.
Ah ha.Looks like you’ve the new hub I’m still on the old cast hubs (big disc) so can just change the bearings. View attachment 909639View attachment 909638
Make sure you don't have too big a bean.
When I have the cleaners in i make them remove the bigger beans, as well as the smaller ones.
Stick them in as deep as possible, don't go fast.
Depends on tgw, but yes should be enough.ok thanks for that. What do you set your barrel at?? Is 200kg/ha enough
To much pressure on them??View attachment 910841This is the problem we are having with the air less tyres had 4 go now
The first two there was too much pressure on drill the last two have gone after we have had drill re set up by weavingTo much pressure on them??
Damage already done?The first two there was too much pressure on drill the last two have gone after we have had drill re set up by weaving