Helping a mate with his baler and need some fresh ideas.
It's a welger 235 double action profi with the e-link controls.
The problem is that sometimes at startup or during the operation he get the message can module missing.
It doesn't say which of the 2 modules it is.
I've checked the wiring and also set up 2 small lights wired directly into the connectors of the canmodules so he could see if the would loose power when this happens but they have good power at all times so that's not the issue.
Any known issues with these modules?
Do these modules have specific programming or could we get a used module from another machine?
I see in the manual the adress of the modules can be programmed.
It's a welger 235 double action profi with the e-link controls.
The problem is that sometimes at startup or during the operation he get the message can module missing.
It doesn't say which of the 2 modules it is.
I've checked the wiring and also set up 2 small lights wired directly into the connectors of the canmodules so he could see if the would loose power when this happens but they have good power at all times so that's not the issue.
Any known issues with these modules?
Do these modules have specific programming or could we get a used module from another machine?
I see in the manual the adress of the modules can be programmed.