welger rp200

Alwaysinit

Member
Arable Farmer
Need to replace the bearing on the roller which the door hinges on.
Took the large drive sprocket off and now cannot get the center nut off, half the nut is recessed into this spacer so cannot get a good fit on the nut. The spacer doesn't seem to be able to be hit back any to reveal anymore of the nut.
Any ideas?
 

Attachments

  • 20220102_124154.jpg
    20220102_124154.jpg
    119.1 KB · Views: 0

Make Tax Digital Software Poll

  • Quickbooks

    Votes: 33 16.5%
  • Sage

    Votes: 20 10.0%
  • Xero

    Votes: 93 46.5%
  • Other

    Votes: 54 27.0%

Man fined £300 for bonfire-related waste offences

  • 202
  • 0
Written by William Kellett from Agriland

court-640x360.jpg
A man has pleaded guilty at Newtownards Magistrates’ Court to waste offences relating to a bonfire next to the electrical sub-station on the Circular Road in Newtownards, Co. Down.

Gareth Gill (51) of Abbot’s Walk, Newtownards pleaded guilty to two charges under the Waste and Contaminated Land (Northern Ireland) Order 1997, for which he was fined £150 each and ordered to pay a £15 offender’s levy

On June 25, 2018, PSNI officers went to Gill’s yard, where they found a large amount of waste consisting of scrap wood, pallets, carpet and underlay.

Discussion with Northern Ireland Environment Agency (NIEA) officers confirmed the site...
Top