welger rp200

[Alwaysinit]

Need to replace the bearing on the roller which the door hinges on.
Took the large drive sprocket off and now cannot get the center nut off, half the nut is recessed into this spacer so cannot get a good fit on the nut. The spacer doesn't seem to be able to be hit back any to reveal anymore of the nut.
Any ideas?

 

[Alwaysinit]

Bit of brain fade!! looked at it again and sure the spacer slipped off over the top of the nut with a set of pullers.

 

[BRB John]

I was just about to suggest that. glad you got it sorted. Or that bit at least...