what angle to cut at

farmerste

Member
Livestock Farmer
Location
Preston
just about to order some steel to put another bay on the end of an existing portal frame shed, it has a 15 degree roof pitch so am i guessing rightly that i need to ask steel stockholders to make my cuts at 115 degrees ,cant remember properly what angles i asked for the last time i had some cut and its a long time since i was at school :rolleyes:
 

JD6920s

Member
Mixed Farmer
Location
Shropshire
105 degrees for 15 degree pitch.
90 degrees +/- 15 degrees
just about to order some steel to put another bay on the end of an existing portal frame shed, it has a 15 degree roof pitch so am i guessing rightly that i need to ask steel stockholders to make my cuts at 115 degrees ,cant remember properly what angles i asked for the last time i had some cut and its a long time since i was at school :rolleyes:
I thought 75 deg! 🤯
 
Just sketch something like this out and note the 15deg splay cut, they measure the angle from the square cut.

1606951055367.png
 

SFI - What % were you taking out of production?

  • 0 %

    Votes: 79 42.9%
  • Up to 25%

    Votes: 63 34.2%
  • 25-50%

    Votes: 30 16.3%
  • 50-75%

    Votes: 3 1.6%
  • 75-100%

    Votes: 3 1.6%
  • 100% I’ve had enough of farming!

    Votes: 6 3.3%

Red Tractor drops launch of green farming scheme amid anger from farmers

  • 1,287
  • 1
As reported in Independent


quote: “Red Tractor has confirmed it is dropping plans to launch its green farming assurance standard in April“

read the TFF thread here: https://thefarmingforum.co.uk/index.php?threads/gfc-was-to-go-ahead-now-not-going-ahead.405234/
Top