What lift pump is this?

[Flat 10]

On a Perkins in a Sanderson forklift. Think it’s a 1000 series (year 1994).
all the ones I see online with that hose layout claim to be for 6 cylinder engines, anyideas?

 

[Timbo]

Well its a standard lift pump as fitted to the Perkins 1000 series 4 pot.

 

[Lincs Lass]

Looks similar all though the pipe outlets are the opposite way round ,maybe they can be turned 180 deg

Fuel Lift Pump for Perkins 4108 Diesel Engines

Diesel Fuel Lift Pump & Gasket. This 2 bolt lift pump suits the Perkins 4108 engines and replaces 2641702 461-229

www.asap-supplies.com

 

[Mur Huwcun]

Top of the pump can be moved around to suit your setup.

 

[Flat 10]

Top of the pump can be moved around to suit your setup.

Now we are talking.Clever. That's why I ask on here. Thanks for all of your help everyone.

 

[Flat 10]

Most of the ones i had looked at @Timbo were with inlet and outlet on opp sides you see. Hence my question.

 

[Mur Huwcun]

Now we are talking.Clever. That's why I ask on here. Thanks for all of your help everyone.

Remove the 6ish bolts that hold it together, rotate and re bolt together. Just be careful when splitting it not to damage the diaphragm.

 

[tomlad]

Or unhook the diaphragm

 

[ACEngineering]

On a Perkins in a Sanderson forklift. Think it’s a 1000 series (year 1994).
all the ones I see online with that hose layout claim to be for 6 cylinder engines, anyideas?

It's a big standard perkins lift pump. New style have no top with gauze filter. Body Riveted together and a plastic filter behind a big nut on the inlet port.

Cheap as chips I just buy genuine perkins.

 

[ACEngineering]

Most of the ones i had looked at @Timbo were with inlet and outlet on opp sides you see. Hence my question.

That type will be for the old perkins 4236 type engines not a 1000series. Although they may fit if you reroute the pipes.
Really not worth the hassle though?‍

 

[ACEngineering]

On a Perkins in a Sanderson forklift. Think it’s a 1000 series (year 1994).
all the ones I see online with that hose layout claim to be for 6 cylinder engines, anyideas?

Part number is ULPK0034 for the new type.

 

[Flat 10]

Part number is ULPK0034 for the new type.

You are most helpful. I knew you would know but I didn’t want to tag you every time I wanted help with the forklift!

 

[ACEngineering]

You are most helpful. I knew you would know but I didn’t want to tag you every time I wanted help with the forklift!

Its fine, i got them on the shelf but IMO there are mugs on ebay selling them below what perkins charge me so you might as well by one off there! unless theres something else you want to combine with it but i'm busy tomorrow so wont get chance to ship it out.