Good question, I’ve not really thought about it to be honest. It’s usually a job in between other jobs but I’d say 80-100 on a fully day but that doesn’t happen often. Pull them with a 6215R 15-17 kph on the flat ground, fields are probably 10-15 ac average size so usually a lot of headlands as well. They do sometimes go on the 6630 but will struggle to get over 10kph and you know they’re on the back when in the air!How many acres a day do you do?
How many acres a day do you do?
Kockerling rebellMy short list so far is
Inverta
X press
Joker
Ideally looking for a 6meter machine that is trialled have 240hp tractor and no hills
How much is one of those?We have a mounted 4m Inverta, does a really good job on all our land and we have everything from moss (peat), black sand, stone, yellow clay and everything in between. Can usually get away with a single pass, the only issue we’ve found and I know others have as well is in dam conditions long trash builds up around the scrapers on the packer and they need to be kept well adjusted. It doesn’t really affect the operation but it’s a pig to clean out!
View attachment 1003823
I think list price is just shy of 16k, ours was a set that had been used on a couple of show stands and they where on a wagon on the way back from a show coming past our yard so got a good discount as saved on the haulage a bit.How much is one of those?
I had a price on a 4m rigid carrier and a 425 carrier x in the spring. There was a big difference. I would really like the narrow transport width, but not at all cost.
Couldn’t tell you to be honest you’d have to speak to them. It’s not an option I’ve seen though.@Phil P can you have it with hydraulic dept adjustment? I found that very usefull on my not-so-uniform ground on the carrier demo.
My short list so far is
Inverta
X press
Joker
Ideally looking for a 6meter machine that is trialled have 240hp tractor and no hills