What tool do I need for this?

[foobar]

I need to replace a cab door hinge on my Kubota RTV900 (the hinge pin sheared off when frozen, oops), but the bolts are hidden under these plastic cap things. What tool do I need to remove these does anyone know?

 

[TripleSix]

The ones on the inside will pry off with a screwdriver or wiggle off with pliers.

I would think the outer ones will be part of the actual bolt.

Get the inner ones off, turn the nuts and see what happens.

 

[foobar]

Okay I'll give that a go, thanks

 

[ste]

Just prise the caps off the inner nuts and undo, I use circlip pliers on the outer ones to hold them

 

[REStracTORATION]

+1 for circlip pliers or mole grips when the nut is rusted on

There is a proper pin locking tool but getting the right one is more trouble than its worth

 

[Phil P]

+1 for circlip pliers or mole grips when the nut is rusted on

There is a proper pin locking tool but getting the right one is more trouble than its worth

Beet me to it

+1 for what @REStracTORATION and @ste said

 

[Maico490]

I put two pin punches in the outer ones then turned with a screwdriver wedged between them. Machine was fairly new though and no rust.

 

[bkg]

Have you got one of these adjustables sat about,drill hole in each end the size of the pin needed knock two roll pins in, and adjust to the required distance works on pin hole type rams as well.

 

[foobar]

Got the bolts off, thank you all - no rust on that bit thankfully. Just got to get the sheared-off hinge pin out of the hinge now which is rusted in it seems ... will have a go at drilling that out later (bashing it didn't work )