I wished they were a foot longer
while we are talking about tackle and wishing it was a bit longer, I wouldn’t mind a few more inches
I wished they were a foot longer
The older you get, the longer the catching stick you need - I'm getting like mine should be about 10'longI wished they were a foot longer
Lets see you list first themBe more interesting to see the nettle shed ,than a list of the main stuff
Is that a 311 2wd we used to have one of those incredible tractor and what an engine noise in a lot of ways we shouldn’t have sold it.this is my fendt line up...also run mf 3095, NH t7.200 and a mf 550.... For the record the mowers were just being moved to the shed for the winter hence the loader still onView attachment 871972
Yes 1986....think by the plate it's a pre production model...40kph....electric hydraulics..front brakesIs that a 311 2wd we used to have one of those incredible tractor and what an engine noise in a lot of ways we shouldn’t have sold it.
Hell paul , nettle shed , 10 ft flat roll , old 2 leg cousins subsoiler , 3 leg same , 4 m flexicoil to scrap , half a 60/30 building steel work , 2 old irrigator chassis , waiting for a project , one to make a trailer to put plough on ,2 furrow off set plough for ploughing first ridge after spuds back in , 2 x 4 furrow rev ploughs , 1x 4 furr conventional , 2 scrap 5 furr dowdeswells , 10 ft kkk , 10 ft pigtail x 2 , 2000, ltr ali tank on chassis not moved in 5 years , old drill frame with a pigtail tine on it for marking out ploughing matchs, New bucket and fork to fit howard farmhand loader ,all covered up need selling , been there 20 years , scrap briggs boom ,that got mullered , 4 m farm force cast press ...Lets see you list first them
That 60 /30 building steel could find a new home , if you are heading this wayHell paul , nettle shed , 10 ft flat roll , old 2 leg cousins subsoiler , 3 leg same , 4 m flexicoil to scrap , half a 60/30 building steel work , 2 old irrigator chassis , waiting for a project , one to make a trailer to put plough on ,2 furrow off set plough for ploughing first ridge after spuds back in , 2 x 4 furrow rev ploughs , 1x 4 furr conventional , 2 scrap 5 furr dowdeswells , 10 ft kkk , 10 ft pigtail x 2 , 2000, ltr ali tank on chassis not moved in 5 years , old drill frame with a pigtail tine on it for marking out ploughing matchs, New bucket and fork to fit howard farmhand loader ,all covered up need selling , been there 20 years , scrap briggs boom ,that got mullered , 4 m farm force cast press ...
Sheds 1 bay full of row crops duals flotations , ..trailed fert spreader , keyvon and kkk germinator both 6 m , 6 m mounted kkk, 2 log splitters , small chipper ,6 m tele spearhead hedger and saw , beet drill, two ten ton bailey trailers 2 x 12 ton same ,6 fur kv and packomat , knight 'c' press 3 m , twb low disturbance ,subsoiler ,and following press x2 home made bean drill ,one of best bits on farm , 12 m heva rolls , new to us kv fert spreader , berthoud trailed24 m sprayer , averdex spreader , 2 x front press ,4 m amazon drill combi , 2xdrop down lowloaders one for drill ,other for plough , 3 m combi converted to drill stewardship and game strips ,vicon waggler ,and 12 m sprayer for same job , 2 x3 ton trailers ,and 5 other car and small trailers , 7 landrovers ,from daily use to restored . 1 disco ,my pick up ,
2 x 215 r , 6620,6610,6900, 3130 , 2140 with loader ,530/70. *527/67. Loadalls ,linde 4 ton industrial , lexi 660 25 ft cut .. leyland 245 mf230 ,are the wifes road run ploughing tractors ,oh and one earns its keep doing averdex ,
5 irrigators ,one mobile pump ,
Owt elsevyou want to know ,before go and bury it all before pikeys come
Two vaddy drills ? Willy