Chae1
Member
- Location
- Aberdeenshire
A Bednar!?
Whats your machinery line up.
- Thread starter willy
- Start date
- Location
- Lincolnshire
Claydon T4 Hybrid.
GeorgeK
Member
- Location
- Leicestershire
The front line:
Space for a couple more?
HP per acre: The truth? You can't handle the truth!
It's a privilege to have been able to put together such a nice collection over the years, everyone's a good 'un, starts on the key and goes all day very rare to have any problems and if such a thing was to happen there's at least one backup sat in the shed ready to take over
Space for a couple more?
HP per acre: The truth? You can't handle the truth!
It's a privilege to have been able to put together such a nice collection over the years, everyone's a good 'un, starts on the key and goes all day very rare to have any problems and if such a thing was to happen there's at least one backup sat in the shed ready to take over
What sort of roof is that in the shed? Great fleet by the way.
GeorgeK
Member
- Location
- Leicestershire
Thanks! It's standard box profile with foam insulation so it has a flatter sheet on the underside to sandwich the foam in. The other half of the shed not in the picture is the grain store which is why we went with insulated
- Location
- Huntingdon
i thought that was common knowledge
- Location
- Cornwall
We probably have to many tractors -
60 acre owned, 60 acre rented across 2 holdings 4 miles apart.
Ford 5030 - Chilton Loader 2500 hrs, L Reg
International 585XL - 5500 hrs - A Reg.
Massey Ferguson 3060 - 5700 hrs - G Reg
MF 35 + Loader
Fordson Dexta
both the 585 & 5030 owned from new.
another chap I know has 150 acres
case 5130 - 6000hrs
case 4240? with loader
DB 990
DB 880
Zetor 95hp - 08reg
60 acre owned, 60 acre rented across 2 holdings 4 miles apart.
Ford 5030 - Chilton Loader 2500 hrs, L Reg
International 585XL - 5500 hrs - A Reg.
Massey Ferguson 3060 - 5700 hrs - G Reg
MF 35 + Loader
Fordson Dexta
both the 585 & 5030 owned from new.
another chap I know has 150 acres
case 5130 - 6000hrs
case 4240? with loader
DB 990
DB 880
Zetor 95hp - 08reg
Last edited:
Not according to this thread!
Boohoo
Member
- Location
- Newtownabbey
You can never have too many tractors!
We're "farming" 9 acres with a Case 844 and a David Brown 996 whilst looking out for another 996.
A fairly brief look in the shed, definitely more to add
6170R direct drive with loader
6150R auto quad
Kramer kt407
JD m740i
Kuhn axis 40.1 hemc
Kverneland lb85 on no28, all but retired now
And until last week this was my drilling kit for covers, osr [emoji29]
Rest of the kit is owned by the contractor who does my drilling and combining [emoji106]
6170R direct drive with loader
6150R auto quad
Kramer kt407
JD m740i
Kuhn axis 40.1 hemc
Kverneland lb85 on no28, all but retired now
And until last week this was my drilling kit for covers, osr [emoji29]
Rest of the kit is owned by the contractor who does my drilling and combining [emoji106]
Great pics.
I don’t seem to see many hand shovels/ grain shovels, and hand brooms in your pics!!
Hope your overall farm management/ staff policy is “ if it can’t be done from a tractor seat , a job is not done” ,
Plenty manual tools on the farm but they are hardly worthy of a picture [emoji23] other than drilling and combining everything else is down to me, sweeping/mucking out/ clearing drains/fencing/chainsaw work/ operating the grain dryer/maintenance etc, I don’t employ anyone else so have to make every job the most efficient I can [emoji106]
Fair comment.
I was having a “dig” at those that spread empty fertiliser bags everywhere,and empty spray cans everywhere, when under pressure from the manager to get the job done. So not the staffs fault but the manager’s fault, yet they would not admit it, not good.
Last edited:
Foxcover
Member
That sprayer is tidy ?
- Location
- North West
That’s was taken just after I’d finished giving it a refurbishment, had all new pins, bushes, track rod ends, re-sprayed the chassis, pump refurb, full service, boom pins and bushes etc etc.....
You get the idea, there’s a load of pictures in the t@w thread somewhere.
Foxcover
Member
t@w thread?
Today at work
Scottie78
New Member
- Location
- Whittlesey Cambridgeshire
Valtra T234,T194,T174 N174 N142 with loader
2 x 6215r
Ideal 9t coming
Jcb 541-70 and 536-60
Chafer sentry 6000l 36m
Househam ar3000 24m
Agrispread AS55 fert/lime/fibrophos
Dale 6m
Clay don hybrid 4.8m
Amazone 3m combi
Lemken 5furrow
Bailey 16ton beeteaper
Bailey 16ton root crop
Triffit and Easterby 14 ton root crop
6m Kuhn optimer discs
4.5m rexius twin
3 leg cousins flatlift
5m alphego power Harrow - 4m kuhn
Grimme gt170 spud harvester
Basiler with 4 row mounted spud planter
2 x 6215r
Ideal 9t coming
Jcb 541-70 and 536-60
Chafer sentry 6000l 36m
Househam ar3000 24m
Agrispread AS55 fert/lime/fibrophos
Dale 6m
Clay don hybrid 4.8m
Amazone 3m combi
Lemken 5furrow
Bailey 16ton beeteaper
Bailey 16ton root crop
Triffit and Easterby 14 ton root crop
6m Kuhn optimer discs
4.5m rexius twin
3 leg cousins flatlift
5m alphego power Harrow - 4m kuhn
Grimme gt170 spud harvester
Basiler with 4 row mounted spud planter
Wow are you the first brave person to buy the ideal? Hope it goes well and Agco look after you