Wheel hub question

[Thomas5060]

Being lazy and asking here before I get the tools out
Bit of a f**k up this morning, slack nuts and loaded trailer have resulted in the studs getting f#cked. Can studs be replaced or do I need a new hub? 6 stud ADR axle from a kane tipping trailer.

 

[icanshootwell]

Has the wheel holes worn as well?

 

[daveydiesel1]

Studs can be replaced but your rim holes look the worse of it

 

[Stock]

Probably need to replace the rim as you never keep the new studs tight with the damage to the holes and the center hole.............................................................

 

[njneer]

Being lazy and asking here before I get the tools out
Bit of a fudge up this morning, slack nuts and loaded trailer have resulted in the studs getting f#cked. Can studs be replaced or do I need a new hub? 6 stud ADR axle from a kane tipping trailer.
View attachment 867992

New hub and rim would be best.
you can replace the studs they just knock out of the hub but the spigot is badly worn .
In theory the spigot carries the weight of the machine and the nuts are there to keep it tight , with the spigot so badly worn you will be relying on the clamping effect of the studs to stop the rim from moving on the hub and it will never stay tight .

 

[Thomas5060]

Aye rim is worn. And as @njneer says, there is a bit of wear on the hub too. Looks like it's a new hub and rim. Will learn to check my nuts more often.
Next question, any good places to buy a hub online?

 

[Will 1594]

Hunton Legg. Or tyre mart

 

[mo!]

Weld her up? Off road only.

 

[daveydiesel1]

Ring mcilderrys as ther a kane dealer and should be fit to get it

 

[Thomas5060]

Ring mcilderrys as ther a kane dealer and should be fit to get it

They've always been useless in past, even supplied wrong filters for 265 once so don't bother with them anymore

 

[Thomas5060]

Hubcap measures 90mm does that mean it's a 90mm hub?

 

[C.J]

Hubcap measures 90mm does that mean it's a 90mm hub?

Probably not.

A 6 stud axle would usually be made from 70mm square bar so I think you would want a hub for a 70mm axle.

 

[Boohoo]

UK distributor for ADR

ADR UK - Tyremart

www.adraxles.com

Link to spare parts catalogue and the app

After-sales - ADR Group | Axles, Suspensions, Brakes and Wheels

After-sales Prompt support all around the world. We prioritize our customers in every corner of

www.adraxles.com

Should be an identification plate on the axle.

As far as I know Kane are closed at the moment but you'd like to think they'd reply to an email or that some of their dealers could help

 

[daveydiesel1]

They've always been useless in past, even supplied wrong filters for 265 once so don't bother with them anymore

Well try d a forgie. Thats who we deal with for kane and davey is a top bloke

 

[Barleymow]

Nuts on one wheel on my cousins discs worked loose,could remove wheel without undoing nuts.Have cut the centre out of an old rim and welded in place new studs from Hunton and Legg