Anyone know where you can get Quality Galvanised 4' & 6" nails from?
I put up a load of post and rails two years ago, and I noticed all the nail heads are rusty!
You must have too much time on your handsAnyone know where you can get Quality Galvanised 4' & 6" nails from?
I put up a load of post and rails two years ago, and I noticed all the nail heads are rusty !
Unless you're planning on knocking these nails in a with a rubber hammer, you're going to knock the galvanise off the head hitting it in, as @Cab-over Pete says. The bit of nail that rusts in a post and rail fence is the bit at the point of contact of post and rail - where the moisture gets in and stays.
If you're only using 'treated' timber the whole thing is moot anyway, the posts will rot off inside 5 years, plain nails will last longer than that.
Its got to be one of the biggest scandals going, the whole 'treated' timber market - I drive around seeing these lovely new fences being put up at vast expense and thing 'You'll be picking that lot up off the floor in a few years time'..........
+1Unless you're planning on knocking these nails in a with a rubber hammer, you're going to knock the galvanise off the head hitting it in, as @Cab-over Pete says. The bit of nail that rusts in a post and rail fence is the bit at the point of contact of post and rail - where the moisture gets in and stays.
If you're only using 'treated' timber the whole thing is moot anyway, the posts will rot off inside 5 years, plain nails will last longer than that.
Its got to be one of the biggest scandals going, the whole 'treated' timber market - I drive around seeing these lovely new fences being put up at vast expense and thing 'You'll be picking that lot up off the floor in a few years time'..........
Unless you're planning on knocking these nails in a with a rubber hammer, you're going to knock the galvanise off the head hitting it in, as @Cab-over Pete says. The bit of nail that rusts in a post and rail fence is the bit at the point of contact of post and rail - where the moisture gets in and stays.
If you're only using 'treated' timber the whole thing is moot anyway, the posts will rot off inside 5 years, plain nails will last longer than that.
Its got to be one of the biggest scandals going, the whole 'treated' timber market - I drive around seeing these lovely new fences being put up at vast expense and thing 'You'll be picking that lot up off the floor in a few years time'..........
I got a box of 6" ordered in at my local builders merchants. No problem.Anyone know where you can get Quality Galvanised 4' & 6" nails from?
I put up a load of post and rails two years ago, and I noticed all the nail heads are rusty!
You shouldnt have to nail the strut onHaven't used non galvanized nails for 20 yrs +. Didn't know they still made them not galvanized.
Using 8 inch galv nails for struts on strainer posts now.
Unless you're planning on knocking these nails in a with a rubber hammer, you're going to knock the galvanise off the head hitting it in, as @Cab-over Pete says. The bit of nail that rusts in a post and rail fence is the bit at the point of contact of post and rail - where the moisture gets in and stays.
If you're only using 'treated' timber the whole thing is moot anyway, the posts will rot off inside 5 years, plain nails will last longer than that.
Its got to be one of the biggest scandals going, the whole 'treated' timber market - I drive around seeing these lovely new fences being put up at vast expense and thing 'You'll be picking that lot up off the floor in a few years time'..........
You must have too much time on your hands
When I put any post and rail fencing up I’ve never been arsed to check the nail heads later to see if they’ve turned orangemy first thought....these days why use nails?....battery drill and deck screws IMO
When I put any post and rail fencing up I’ve never been arsed to check the nail heads later to see if they’ve turned orange