Where to fit an extra toolbox on a combine?

[Pilatus]

If any one has fitted an extra tool box/ brackets for tool box on the combine they use I would like to know where you fitted it.
All makes and ages break down so let’s get that straight .

 

[Bob lincs]

If any one has fitted an extra tool box/ brackets for tool box on the combine they use I would like to know where you fitted it.
All makes and ages break down so let’s get that straight .

On the back of the header so it’s near the steps .

 

[whiddy]

On the header near the steps!

 

[whiddy]

not quick enough!!

 

[Skimmer]

Bench in workshop, ring fence farm 5 minutes max with header on.

 

[Sals dad]

If you zoom in you can see mine , just tool box on simple angle iron frame , I find plastic box keeps dust out better

 

[Chae1]

Ours is mounted on header too.

 

[Bob c]

depends on combine, some will need a super large one

 

[tw15]

Fendt will need a tow bar to tow the fitters caravan around so he's always onsite .
Case axial flows here i put a large homemade box on the side holds tool boxes and spares and a couple of 5ltr containers of oil . On the header trailer of one also put a large homemade box to carry belts and concaves etc . Always nice to have spares with the combine .

 

[Sals dad]

If any one has fitted an extra tool box/ brackets for tool box on the combine they use I would like to know where you fitted it.
All makes and ages break down so let’s get that straight .

 

[Sals dad]

If any one has fitted an extra tool box/ brackets for tool box on the combine they use I would like to know where you fitted it.
All makes and ages break down so let’s get that straight .

Sorry for delay been of spraying for a while, hope these are ok

 

[GlennW]

Here’s another one

 

[Phil P]

Here’s mine but it comes from the factory like this. The section above also opens up (you have to lift the side panel though), it houses the battery but there’s also extra storage compartments.

 

[MultimaxDirect]

Would a tool wrap be useful instead?

 

[Romeogolf]

Made this tray to fit toolbox on my TX66

I have to walk round the header to get to it but works for me. I can lift it off and take to the scene of the crime.

 

[DanniAgro]

Fendt will need a tow bar to tow the fitters caravan around so he's always onsite .
Case axial flows here i put a large homemade box on the side holds tool boxes and spares and a couple of 5ltr containers of oil . On the header trailer of one also put a large homemade box to carry belts and concaves etc . Always nice to have spares with the combine .

Carrying a couple of spare conclaves - that's got to be one hell of a toolbox!