Which sprayers nozzles?

Oilseed

Member
Location
North Cambs
I think the most important thing with spraying is to be able to get around in a timely manner. Low water rates help with this.
I have an out lying block I always do in 2 tank loads. I could do it in 1 tank load if I went at 60 l/ha, does anybody go this low?
Which would be the best nozzles in this situation?
 

JCfarmer

Member
Mixed Farmer
Location
warks
I use blue BFS nozzles, 120l/ha at 3 bar 12km in the main. Used to be on lilac Guardian Air but the nozzles block far to easily with tiny specks and buggering the spray pattern. Also use small blue top hat filters.
 

legin

Member
Arable Farmer
Location
West Midlands
I use blue BFS nozzles, 120l/ha at 3 bar 12km in the main. Used to be on lilac Guardian Air but the nozzles block far to easily with tiny specks and buggering the spray pattern. Also use small blue top hat filters.
Got rid our Guardian Air 03s last year. Now on BFS 03s.
 

Renaultman

Member
Arable Farmer
Location
Darlington
It’s ok guys no need to fall out there invariably never is a true best nozzle a lot of horses for courses we tend to use guardian air for most jobs but wo7ld be interested in knowing the price of the ex ray bfs nozzles just out of interest although I have just replaced a se5 of guardians so not needing new ones for a bit
Same here, get good results from GAs but every day's a school day. Also aware of the fact that the flat fan boys will be quietly laughing at us fashion victims rushing headlong in to the next trend.
 

radar

Member
Mixed Farmer
While we are talking Guardian Airs how do people go about dismantling them to clear a blockage. Is there a special tool rather than a pen knife which inevitably cuts the spurs off in time?
 

Scragger

Member
What’s everybody running for blight spraying 200ltr, currently on guardian air twins 05, just wondering if there’s anything better out there..?
 

stroller

Member
Arable Farmer
Location
Somerset UK
While we are talking Guardian Airs how do people go about dismantling them to clear a blockage. Is there a special tool rather than a pen knife which inevitably cuts the spurs off in time?
Get a 6" piece of multicore copper flex, strip half the insulation off then use one of the wires to poke through the nozzle, saves dismantling them and twisting off those little tabs
 

legin

Member
Arable Farmer
Location
West Midlands
What’s everybody running for blight spraying 200ltr, currently on guardian air twins 05, just wondering if there’s anything better out there..?
BFS 04s Air bubble jets. Have now got some BFS Exray XCs one angled forward & one straight down. Haven't tried them yet.
 

SFI - What % were you taking out of production?

  • 0 %

    Votes: 101 41.6%
  • Up to 25%

    Votes: 88 36.2%
  • 25-50%

    Votes: 36 14.8%
  • 50-75%

    Votes: 5 2.1%
  • 75-100%

    Votes: 3 1.2%
  • 100% I’ve had enough of farming!

    Votes: 10 4.1%

April Event: The most profitable farm diversification strategy 2024 - Mobile Data Centres

  • 437
  • 0
With just a internet connection and a plug socket you too can join over 70 farms currently earning up to £1.27 ppkw ~ 201% ROI

Register Here: https://www.eventbrite.com/e/the-mo...2024-mobile-data-centres-tickets-871045770347

Tuesday, April 30 · 10am - 2pm GMT+1
Location: Village Hotel Bury, Rochdale Road, Bury, BL9 7BQ

The Farming Forum has teamed up with the award winning hardware manufacturer Easy Crypto Hunter and Easy Compute to bring you an educational talk about how AI and blockchain technology is helping farmers to diversify their land.

Over the past 7 years, Easy Crypto Hunter have been working with farmers, agricultural businesses, and renewable energy farms all across the UK to help turn leftover space...
Top