XCN-2050 TRIMBLE - CNH

[Ronald5]

Consultation:
1.- XCN-2050 and TMX-2050 is the same?
2.- What are the ways to update the NavController III, I don't have the wifi modem
3.- Display software compatibility with the NavController, TM-200
4.- I have a satellite reception problem with the AG25 never picking up a signal in any type of correction

please help!

 

[Slick]

1. Basically yes, although the firmware is different.
2. You can update the Nav III from the display, from home screen hit the circle with six dots icon at the bottom of the screen, then hit the Nav icon and follow the intsructions. That doesn't always work, in which case you need a laptop with Flashloader software.
3. Nav III needs updating.
4. Updating the Nav III may cure this issue.

 

[Ronald5]

Thanks Slick, I update the NavController III and test if it works

 

[SinisaB]

Consultation:
1.- XCN-2050 and TMX-2050 is the same?
2.- What are the ways to update the NavController III, I don't have the wifi modem
3.- Display software compatibility with the NavController, TM-200
4.- I have a satellite reception problem with the AG25 never picking up a signal in any type of correction

please help!

Hi,

Check antenna cable. If it is good, than tm200 is dead. It is repairable. Common problem with the tm200 receiver.