Yamaha brake caliper disassembly

[milkloss]

Might be some with ideas on here I hope. Servicing the bike up: new rear bushes, 2xnew cv boots and brakes.
Rear caliper has got me fudged, how do I get the cap off that covers the pin for the pads?

 

[2wheels]

unscrew the slotted bit and undeneath there is an allen key bolt.

 

[milkloss]

unscrew the slotted bit and undeneath there is an allen key bolt.

Thanks. Knew that already though, been in there a few times and always used copper grease every time but it doesn’t seem to work between steel and ally! Just drilled it out, doesn’t look pretty, pin came out easy. Sliders were seized solid but came in the end.

Any ideas what grease to use on sliders?

 

[2wheels]

Thanks. Knew that already though, been in there a few times and always used copper grease every time but it doesn’t seem to work between steel and ally! Just drilled it out, doesn’t look pretty, pin came out easy. Sliders were seized solid but came in the end.

Any ideas what grease to use on sliders?

copaslip

 

[TripleSix]

Try aluminium based anti seize.

Sealey SCS103 Aluminium Anti-Seize Compound 500g Tin https://www.amazon.co.uk/dp/B01MQ5GZ0V/ref=cm_sw_r_cp_apa_i_Pne0Db9M06W0G

 

[timmyboy]

ACF Corrosion Block Waterproof Grease is good. I use it on all my bikes almost everywhere. It's not cheap but it is worth it.