Cagle800's latest activity
-
CCagle800 replied to the thread 2005 Manitou MLT627 Turbo - question.Can anyone tell me what size metric cap I need to purchase to cap off the brake line so I can identify whether it's the front axle or...
-
CCagle800 replied to the thread 2005 Manitou MLT627 Turbo - question.Replaced bad brake master cylinder all was good. Now, pedal goes to the floor and I have to bleed the brakes and it works for a very...
-
CCagle800 replied to the thread 2005 Manitou MLT627 Turbo - question.Brake Master Cylinder is leaking. Is a rebuild seal kit an option or do I need to just replace it with a new one.
-
CCagle800 replied to the thread 2005 Manitou MLT627 Turbo - question.You were so right. Changed oil and put antisquark and problem is gone. Now I'm curious about the heat gauge. Most of the time when I...
-
CCagle800 replied to the thread 2005 Manitou MLT627 Turbo - question.I assume that I can rebuild it. Are their any issues that would prevent me from tearing it apart and rebuilding it.
-
CCagle800 replied to the thread 2005 Manitou MLT627 Turbo - question.The MLT 627 has developed a loud popping grinding noise in the front axle. Also the front axle was very hot to the touch right in the...
-
CCagle800 replied to the thread 2005 Manitou MLT627 Turbo - question.Problem solved. Thanks. Next question. The front steering cylinder is leaking and needs new seals. Is the removal of the steering...
-
CPurchased a very used and abused Manitou 627T a month ago. Completely serviced it and with a few issues we have her up and running...
-
CCagle800 replied to the thread Manitou MLT627 Transmission Strainer.Im up and running. Two issues were causing my problem. As you suggested the gear stick sensor was open all the time and the hand brake...
-
CCagle800 replied to the thread Manitou MLT627 Transmission Strainer.The connector I found under the hand brake has four wires going to it. Black, orange Brown and Blue. I don't read any connective...
-
CCagle800 replied to the thread Manitou MLT627 Transmission Strainer.Ok, I have checked the transmission fuse and its good. I have bypassed the seat switch and disconnected the hand brake and gearstick...
-
CCagle800 replied to the thread Manitou MLT627 Transmission Strainer.Thanks for all the suggestions. Now, it will not move at all even after letting it run for a while. It doesn't seem to be sending...
-
CCagle800 replied to the thread Manitou MLT627 Transmission Strainer.Thank you for the replies. It is a 2005 MLT627 Turbo. It has been abused by the previous owner and is in bad need of a complete...
-
CCan anyone tell me if my Manitou MLT627 has a transmission strainer. The book says it does but we cannot find it. If it does please...