Recent content by jaan14141

The fert thing with 750a is not so simple at all. Then 750a Is rubbish when it gets old. And väderstad rapid has had those 4 rubber pieces for years and still does the yob perfectly.

In general yes, but in details definitely not. Avatar build quality is exelent. And price is about the same, but with Avatar you get combi drill, with 5000L seed/fert box and more up do date drill for the money.

I would recommend Horsch Avatar, 8-10-12m also fert option from factory!

I´m producing food in Estonia!

Yes only the main drum can be closed now. But it`s an option so i would check that before buying! Also gathering some information how the closed drum combine acts in damper conditions would be good. My doubts came from fact that in my country we have mostly damp conditions and i have done more...

Mac has “stone trap” in front of the middle belt. Most of the small stones stayed in there, but the bigger ones can get in very easy yes. But as i have lot of stones and lot of crops that have to cut low( peas, beans, barley) i am very happy with mac, as it pick up less stones than the headers i...

If the belts are set up right then no problem at all.

In estonia we get 135FD with jd adapter and all bells and whistles to straight cut osr in about 90k euros

Now used macdon for 2 seasons , very happy in all conditions but especially in tough conditions. And the price should not be to much more than varios!

Not sure about closed drum in damper conditions!

Would not recommend S-series at all. Had 3 very bad years with it. Lack of power and way too high passive fuel consumption. Uses 50l/hr diesel (thats half the horses the S690 has) separator and header engaged but not harvesting.

what setting you use to gain 50t/hr troughput?

Have someone tested the JD S series against NH CR ? Still curious about the twin rotary being better than single rotor.

What model of CR you demoed ?9.80 ?

Can you remeber any numbers of througput t/hr , ha/hr etc in the night time for t670i and CR ?