lemken match plough
- Thread starter willcam98
- Start date
Timo@hattonfarms
Member
- Location
- Warwickshire
Id say if they are ycn specials the boards wouldn't be far of the worth of the asking price
This plough is clearly not allowed in Classic Reversible ploughing so is strictly "World Style". What is it worth when the boards are worn out ?
Timo@hattonfarms
Member
- Location
- Warwickshire
F all
Timo@hattonfarms
Member
- Location
- Warwickshire
If euro style reversible ploughing is what the OP fancy's having a go at mark's LS80 that he has for sale would be a better bet.
But at £8,600 you will need some steam behind you!
But at £8,600 you will need some steam behind you!
- Location
- Acton Scott, South Shropshire
blimey! That KV looks unmodified - how on earth do you come up with a price tag like that? I am just calculating what a well sorted KV, with a bit of pedigree is likely to be worth 
Timo@hattonfarms
Member
- Location
- Warwickshire
It is westlake everything's dear!blimey! That KV looks unmodified - how on earth do you come up with a price tag like that? I am just calculating what a well sorted KV, with a bit of pedigree is likely to be worth
Timo@hattonfarms
Member
- Location
- Warwickshire
Roy Stokes
Member
- Location
- East Shropshire
3 and a half mouldboards included ??????????blimey! That KV looks unmodified - how on earth do you come up with a price tag like that? I am just calculating what a well sorted KV, with a bit of pedigree is likely to be worth
- Location
- Acton Scott, South Shropshire
Soon to be 4 boards - if I can get time off work!!
- if I can get time off work!!did you hit a rock and break one ???
3 and a half mouldboards included ??????????
Soon to be 4 boards
- Location
- Acton Scott, South Shropshire
nothing so exciting - walked into the shed last year to find one of my homemade boards snapped clean in half after sitting there for over 12 months. Guess I should have let the board stays off but didnt think she'd be there 12 months let alone 3 years
- Location
- Acton Scott, South Shropshire
Ah, but it wasnt the modified areas that snapped - straight down through the middle of the original board about half way along. Going to try dis-similar rods and some support behind the board in the hope that it will still flex like the original. Set of 25's on standby if it doesnt work
do you know the part number of kv no.25s trying to get a price from westlake might be scared to open the quote
Ah, but it wasnt the modified areas that snapped - straight down through the middle of the original board about half way along. Going to try dis-similar rods and some support behind the board in the hope that it will still flex like the original. Set of 25's on standby if it doesnt work
Roy Stokes
Member
- Location
- East Shropshire
Ah, but it wasnt the modified areas that snapped - straight down through the middle of the original board about half way along. Going to try dis-similar rods and some support behind the board in the hope that it will still flex like the original. Set of 25's on standby if it doesnt work
If the CRB No 1's version 10 ( Colin R Bowen
) won't weld I think you may be well disappointed with No 25's
Timo@hattonfarms
Member
- Location
- Warwickshire
Will, have you tried talking to anyone at the Scottish ploughing society? Someone there might be able to help you in finding some bodies?
- Location
- Acton Scott, South Shropshire
Have come to the conclusion that apart from extended shins I would only be using same boards as most - still hate the work they produce!If the CRB No 1's version 10 ( Colin R Bowen