Waltercheid and comer gearboxes for spearhead/bomford batwing toppers

Dave W

Member

Location

chesterfield

• Aug 10, 2015

• #2

Bump

 

Kevtherev

Member

✓

Location

Welshpool Powys

• Aug 10, 2015

• #3

@Nick

 

Dave W

Member

Location

chesterfield

• Aug 10, 2015

• #4

Kevtherev said:

@Nick

Click to expand...

Already done that. Too big I think

 

webber1056

New Member

• Aug 28, 2015

• #5

Have you still got 1 of the 1s in the 2nd picture? If so how much are they please?

 

Dave W

Member

Location

chesterfield

• Aug 28, 2015

• #6

Yes.
They are 3 x 20 spline on the larger 1-3/4 shaft. Look to be a 1:1 ratio

 

webber1056

New Member

• Aug 28, 2015

• #7

If they are 1 3/4 shaft I don't think they're the right ones, I don't suppose you could double check the shaft size for me please? Thanks luke

 

Dave W

Member

Location

chesterfield

• Aug 28, 2015

• #8

Yes they're 1-3/4. Definitely not standard 21 spline tractor pto

 

webber1056

New Member

• Aug 29, 2015

• #9

Ok thanks, can you measure the height, from where it mounts, and also the bolt spacings as well please, thanks luke

 

Dave W

Member

Location

chesterfield

• Aug 29, 2015

• #10

Height is 220mm. Holes are 6"/152mm centres in an equal square shape

 

webber1056

New Member

• Aug 31, 2015

• #11

Thanks for that, can you give me a couple of days to see if I can get the appropriate size uj's for the shafts I've got? If I can make it work, how much do you want for it delivered to West Sussex? Thanks luke

 

Dave W

Member

Location

chesterfield

• Aug 31, 2015

• #12

Hadn't thought about price. Have you had a price on a new one?

 

webber1056

New Member

• Aug 31, 2015

• #13

No I haven't, to be honest I can't actually find the 1 I'm after, mines got
1 3/8 21 shafts, all I can find is 1 3/8 6
yours is the closest, although a tad bigger in size,

 

Dave W

Member

Location

chesterfield

• Aug 31, 2015

• #14

I'll have a word with a supplier I use tomorrow

 

webber1056

New Member

• Aug 31, 2015

• #15

Ok, can you measure how long the output shafts are foe me aswell please! Thanks

 

webber1056

New Member

• Sep 5, 2015

• #16

Did you have any luck with a price, and the lengths of the output shafts? @Dave W

 

Dave W

Member

Location

chesterfield

• Sep 5, 2015

• #17

Useable bit of the spline is 70mm on the side shafts and 80mm on the front. The side shaft is 395mm end to end.
Couldn't find a new price.
Is it worth £150 delivered?

 

Dave W

Member

Location

chesterfield

• Apr 29, 2016

• #18

bump

 

S

simonk88

Member

Location

Lincolnshire Wolds

• Jun 12, 2017

• #19

Are these still for sale?

 

Dave W

Member

Location

chesterfield

• Jun 12, 2017

• #20

Yes I still have them all