Spearhead 460 Topper PTO guard

itsintheblood

Member

Location

south west in over the knap

• Jul 16, 2023

• #1

Wondering if anyone can help me find a replacement PTO guard as ours is damaged. It’s from a 2019 machine, been quoted £440 for a genuine ‍ wide angle on the tractor end. Please see attached information on the guard

 

john432

Member

Location

Carmarthenshire

• Jul 16, 2023

• #2

A Vapormatic gaurd such as VTE1537 should match, RRP £170 + some £10 for the retaining collars. But double check!
A genuine guard from Kramp using the number in your photo is £124.50
Just goes to show.. allways pays to shop around!

 

Last edited: Jul 16, 2023

David.

Member

Mixed Farmer

Location

J11 M40

• Jul 16, 2023

• #3

@ACEngineering
If its the same as mine it's a Bondioli guard, and that is what you will get from Sparex, complete.

 

Last edited: Jul 16, 2023

Dave W

Member

Location

chesterfield

• Jul 16, 2023

• #4

I’m not sure spurious guards fit that type of shaft.

 

Fergieman

Member

Mixed Farmer

Location

Northumberland

• Jul 16, 2023

• #5

5CS6121FXSS is showing as 2 standard ends on Kramp (as in the number on your guard)
5CS6121FXWS is 1 wide and 1 standard end.

Just watch it's not a standard end with an extra part added to make it wide angle. PTO guards are a nightmare.

 

Dave W

Member

Location

chesterfield

• Jul 16, 2023

• #6

Fergieman said:

5CS6121FXSS is showing as 2 standard ends on Kramp (as in the number on your guard)
5CS6121FXWS is 1 wide and 1 standard end.

Just watch it's not a standard end with an extra part added to make it wide angle. PTO guards are a nightmare.

Click to expand...

They are a 2 piece guard. Comes as a tube and collar that the screws go through. Then presumably the bellows part is optional wether it’s standard or wide angle

 

nick...

Member

Arable Farmer

Location

south norfolk

• Jul 16, 2023

• #7

I’m sure you could rivet the bellows back on to a new guard
nick...

 

itsintheblood

Member

Location

south west in over the knap

• Jul 16, 2023

• #8

David. said:

@ACEngineering
If its the same as mine it's a Bondioli guard, and that is what you will get from Sparex, complete.

Click to expand...

Your right it is a Bondioli guard

 

Dave W

Member

Location

chesterfield

• Jul 16, 2023

• #9

itsintheblood said:

Your right it is a Bondioli guard

Click to expand...

If it’s just the timing that’s damaged you could buy a new plain guard and fit the wide angle part from original

 

ACEngineering

Member

Location

Oxon

• Jul 16, 2023

• #10

itsintheblood said:

Your right it is a Bondioli guard

Click to expand...

With a bit of help from David to ID i supplied him a gaurd recently. PTO stuff or general agri stuff isnt really what i do but i can supply anything in the vap, bepco or sparex range if needed.

Below is what i'm guessing is the sparex options, you could be looking for. woul dhave to call them tomorrow to get a eta on any of the out of stock ones.

 

neilo

Member

Mixed Farmer

Location

Montgomeryshire

• Jul 16, 2023

• #11

I replaced mine with a (large) BareCo guard. You could probably make a tidier job over the wide angle joint if you can fix the original bellows on, but the BareCo makes greasing a hell of a lot easier.

 

ACEngineering

Member

Location

Oxon

• Jul 16, 2023

• #12

itsintheblood said:

Your right it is a Bondioli guard

Click to expand...

This might be what you want? In UK stock, a little more than sparex but i suspect sparex price will go up with new stock maybe? Delivery included to you door tuesday with a bit of luck maybe.

 

itsintheblood

Member

Location

south west in over the knap

• Jul 16, 2023

• #13

ACEngineering said:

This might be what you want? In UK stock, a little more than sparex but i suspect sparex price will go up with new stock maybe? Delivery included to you door tuesday with a bit of luck maybe.
View attachment 1124618

Click to expand...

Can I have your contact information please
Thank you

 

Dave W

Member

Location

chesterfield

• Jul 16, 2023

• #14

itsintheblood said:

Can I have your contact information please
Thank you

Click to expand...

Look into buying the plain guard and swapping your wide angle and over. It will save you £££

 

Q

quavers

Member

Location

aberdeenshire

• Jul 16, 2023

• #15

neilo said:

I replaced mine with a (large) BareCo guard. You could probably make a tidier job over the wide angle joint if you can fix the original bellows on, but the BareCo makes greasing a hell of a lot easier.

Click to expand...

this what ive done , waiting for the wide angle part to come in . bareco

 

M

marshtowers

Member

Location

Cambridgeshire

• Jul 17, 2023

• #16

Looks like all in stock at Kramp.

You can try to get an account through a local dealer