Search results

your Paddy friend thought you might like this one, A girl was granted two wishes: First she asked for bigger (.)(.) They instantly grew to 36 DD. Then she asked for a really tight pansy. She'll probably ring you later.. It's only a joke even if you have heard it before, and in the Wrong place...

Others might not, I have to agree, bit of cracks ok for me on a wet Sunday night and a bit of light entertainment when there's not much on tv but I think some of us should change station, ok guys.

I doubt it ! na, what I ment to say SONNY was, I hope not.

? for all the Wrong reasons ! LOL.

Definitely, a good concise and precise answer to a simple question which only required a couple of lines but now we are heading for a third page. I agree Qman, Most of the replies have been good and helpful and for that the guys were thanked with the original question and I'll thank them again...

As above really, what oil should I be using in the back of an MXM130, the book says Hy-Tran or spec iso 32/46, so is hydraulic 46 ok or what else should I use? Guys ! Read the original question "above" and read it real "slow" first our friend asks a question, then he tells us what the...

Got it, never doubted you! for Transmission,Rear Axle and Hydraulic System use Hy-Tran Ultra, for Front Wheel Drive Axle use Hy-Tran Ultra "OR" any Quality Oil to API GL4, ISO 32/46 the book doesn't say "OR" it does now! OK, use UTTO or Super Universal for Transmission,Rear Axle...

part no 6-32930 05/2002 Case maxxum Operators Manuel Section 4 page 7. Transmission, Rear Axle and Hydraulic System Oil, "Case IH Spec" Case Hy-Tran Ultra "International Spec" N/A-None-Blank. Section below Front Wheel Drive Oil, "Case IH Spec" Case Hy-Tran Ultra "International Spec" API...

Hi guys, was just having a look a the paperwork relating to the immobilizer, looks like its a TOAD fitted to her when she was in Somerset and it says Sterling on the key fob. Sorry about the misleading info!

Hi guys, no power getting to the starter !

hope to get her into a shed tomorrow, see if I can find anything, havnt got a clue what the immobiliser even looks like or where it would be but probably say sterling on it, any other ideas would be very welcome,,,,,,,,,yip ill try tapping the starter to, id forgot about that one, thanks for now...

yip, in park, tried just about every other to, its emptying here an she outside but disconnected battery terminalS and re connected, but no odds, when turning key to start, the wipers stop, so does the heater, but lights are not affected and Yip, got a sterling immobiliser

no, havnt touched her yet, did this once before about a 6 weeks ago but don't know why she made herself right and wanted to get to the bottom of it this time, just have her towed home.

Hi, got a 96 Challenger, 2.8 auto, import, single battery, 89,000m, which wont even turn over, lights and all electrics work but it makes no attempt to send power to the starter, doesn't seem like starter is jammed, lights don't even dull when the keys turned, any ideas folks ? Friday night...

i will take a photo of our stone piles each field has a 20 ton pile in every corner and every year we lift the same amount,the stones are never ending and all engine block sized.you just learn to live with them and im an expert on what machines you need to survive stones.plough overum with gas...

got some yellow wheat but as its not been sprayed yet I can't blame the ag chems - wet feet here and a touch of mang defficiency I reckon +1

Parmiter trailed seed drills "Bettinson" used a system where " rams of 2different diamiters moved at exactly the same speed for exactly the same distance, 2 way, to raise and lower the beam "engage and disengage sowing" and it worked perfectly provided the inner seals were ok, if any discrepancy...

Hmmmmmmmmmmmm, some nice work there, i hope i havnt made a ba!!s instead of a log splitter, i made a screw type to run of the pto, havnt tried it yet for i havnt got the screw for it.made from an old Volvo lorry chassie, pto and pillar block bearings, very...

shooooooosh

Will it still germinate at 4 per cent !? Hi, na, by this time it has already germinated and is long past that stage,