No, the accuracy or distance from line is here:Hi everyone, having a day of testing today and having a fiddle with the steer settings. Just wondering am I right in saying that this number is the accuracy? View attachment 1171469
No, the accuracy or distance from line is here:Hi everyone, having a day of testing today and having a fiddle with the steer settings. Just wondering am I right in saying that this number is the accuracy? View attachment 1171469
Fix to fix distance... How far between this reading and last one.Hi everyone, having a day of testing today and having a fiddle with the steer settings. Just wondering am I right in saying that this number is the accuracy? View attachment 1171469
Turn hotspot on your phone and they should recognise each other. Set to connect automatically and you won't need to do it againHow do I connect to my phone via hotspot on a toughbook?
Perfect , yes need to switch off WiFi on my phone .Turn hotspot on your phone and they should recognise each other. Set to connect automatically and you won't need to do it again
On my phone it requires the wifi to be turned off to use mobile hotspot
I was out testing all day yesterday using my hotspot and it hardly used any.Perfect , yes need to switch off WiFi on my phone .
anyone know roughly how much data will be used by using hotspot on your phone? In a day say . ?
Less than 5 mins on youtubePerfect , yes need to switch off WiFi on my phone .
anyone know roughly how much data will be used by using hotspot on your phone? In a day say . ?
Just be careful of Windows updates!That’s great to know, thought it would be proper data sapping
what is that measurement? At the top of the screen supposed to be ? From where to where?View attachment 1171601
The horizontal distance ?Just be careful of Windows updates!
That measurement is distance from antennae to pivot point, so on normal tractor, distance from antennae to rear axle.
Yes.The horizontal distance ?
U13 | 15*10.5*21 | SINK-TH_L15.0-W10.5-H21.0 |
So thats the Heat shrink for the Mofset that operates the lock circuit.Trying to order up missing components, and I need the following, any help?
U13 15*10.5*21 SINK-TH_L15.0-W10.5-H21.0
So I’m out grass harrowing and having a play about, got a new field and boundary set out , and it will follow going round and round to a die View attachment 1171614but as soon as i go up and down it misses a pass and then double ups a pass on the returnView attachment 1171615View attachment 1171618? If that makes senses…… stupid questions no doubt 🫣
Have you got your machine settings right, an offset maybe entered by mistakeSo I’m out grass harrowing and having a play about, got a new field and boundary set out , and it will follow going round and round to a die View attachment 1171614but as soon as i go up and down it misses a pass and then double ups a pass on the returnView attachment 1171615View attachment 1171618? If that makes senses…… stupid questions no doubt 🫣
So thats the Heat shrink for the Mofset that operates the lock circuit.
Try substituting with part No: C116600
That was going to be my next questionYour left front wheel is broken. Never seen AOG doing that, the right front wheel pointing straight forward but left one almost full lock left.
Use PP not stanleyThat was going to be my next question
I’ll pop a load of pics of the settings… so please feel free to highlight any issues…. I’m sure there will be many!!I’ve not knowingly altered any of these 4 pics-View attachment 1171639View attachment 1171640View attachment 1171641View attachment 1171642
But these I have changed-🫢
View attachment 1171643View attachment 1171644View attachment 1171645