It's definitely a tricky one alright.I thought initially that it might be the toggle switch and replaced it with a new one which didn't cure my problem. The toggle switch has a different fault code of its own . I'm beginning to think it must be in the e-box unless there's any other ideas of what...
Pin 1 in Ebox 1 is analogue earth for sensors etc. I have checked all wires to solenoids with multimeter, not picking up any short circuit to other wires within the same loom , and getting full continuity.
Hi Doc,
I can engage f/r with error but only by using the emergency switch which allows you to switch from F to R but only if main gear lever in neutral and clutch pedal pressed, it's basically a limp mode to get you back to the workshop so it obviously bypasses certain inputs /outputs in the...
Hi DrDunc
I've lifted cover and both solenoids are snug and clamped with the clips, if I switch wire from the forwards solenoid to the reverse solenoid and vise versa, reverse switching engages forward drive so solenoids are good,
Any other ideas
Hi all,
I have a fendt favorit 515c and it's showing fault code 4.1.06, which in the operating manual says the forwards solenoid y6, I've checked solenoids and they're good.
When I start the tractor with toggle switch in reverse it engages reverse drive but when I switch to forward drive the...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.