Search results

just my two pennies worth, but do not put a TCT blade in a saw designed for abrasive saws, TCT blades are designed to run at 1500 rpm and not 4000 rpm. a TCT blade running at 4000 rpm will result in someone getting very hurt.

I have hearing loss due to the fact that all of the little hairs in my ears have laid down. It is really bad in crowded rooms and when people mumble. I can hear higher frequencies better. I have hearing aids, but don’t get on with them due the shape of my ear canals. I did try some Shokz OpenRun...

Experienced Sprayer Operator/Drill Driver/Fertiliser Spreader Operator required for family run, predominately arable mixed farm on Romney Marsh, Kent to operate Sands Vision Sprayer, Quad Trac/Sumo DTS and New Holland/Kuhn Axis, all equipped with GPS. Variety of combinable crops and potatoes...

Tipping an artic trailer with barn doors on a dolly might be okay, but not sure I would want to tip an artic trailer with a top hung door loaded with wheat on a dolly as can see the dolly being pulled up in the air as the weight of the wheat is transferred onto the rear door if using the hatch...

Just out of interest, are you relying on the panel clips to hold the concrete panels in place with the OSR piled against it, or do you fill the other side of the wall first?

If you've got a blank canvas, make sure grain store doors face away from prevailing winds, if you use roller shutters make sure you bury the guides in channel sections because someone will bend them, either a small step at door entries or Atco type drain, but they need to be kept clear of grain...