Db990's latest activity
-
DIt will be a Fendt 728
-
DDb990 replied to the thread New toy day.There is usually a metal stop on the seat runners that can be removed to gain more leg room on most MF’s.
-
DRead the manual chap On our 76's the PTO will keep turning when you get out provided the handbrake is on
-
DIf I was MF I'd chuck a daft price in to stop you buying one as well 😉
-
DHow long have you had Fendt? A lot less than 35yrs! You do make some noise
-
DIt is what it is, just don't buy the tractor you've heard bad reports about, but you'll struggle. People on this thread have 8S' with...
-
DDb990 replied to the thread Adblue dpf shite.Have you looked in the manual? It might just need a button pressing to allow it to do a regen.
-
DHello! First time poster, longtime observer, I have printed off and handed out over 200 BFU flyers today at my local livestock auction...
-
DToday I was at Dairy Tech First port of call was to stop at AHDB stand facing the RABDF seminar area to ask when Nick Saphir would be...
-
DIts well catologued on here, you've been over it dozens of times. You're now very anti MF. Yours was a very different spec for a start...
-
DDb990 reacted to melted welly's post in the thread Red tractor stakeholder survey on governance with
Like.
This, single page, short bullet points of facts from the WWF basket document. Key points could include * reduce nitrogen and... -
DDb990 replied to the thread Massey 6480 T3 Perkins error codes.On top of the gearbox at the back of the tractor. It reads off the top of the crown wheel. Check the plug on it first.
-
DDb990 replied to the thread Massey 5613 overheating.Did you definitely put the thermostat in the right way round?
-
DDb990 replied to the thread Massey 5613 overheating.When you filled it with coolant, how much did it take? Should be about 15 litres I think