-
Welcome to The Farming Forum!
As part of this update, we have made a change to the login and registration process. If you are experiences any problems, please email [email protected] with the details so we can resolve any issues.
-
-
JJX1100U replied to the thread Concrete over concrete thickness.Scrabbling the surface would be "better" as you could cover the full surface of the existing slab so its the same across the full...
-
JJX1100U replied to the thread Retrospective structural calcs needed (cold-rolled steel frame agri building).I would follow what PSQ has said. Shed company would be the first call and see if some cash gets their interest. There would be some...
-
JJX1100U replied to the thread Fibres in concrete.Hatsoff has summed up my understanding of fibres as a structural engineer. The biggest use of fibre that I know of is in shotcrete...
-
JJX1100U replied to the thread Kverneland wrapper won't tip or lift bale..So I don't have a KV7515 but do have a KV7640 which I imagine is setup kind of similarly. Can you get to the valve block and manually...
-
JJX1100U replied to the thread Mowing charge.We charge by the hour for mowing (and raking) in Tasmania as a general rule. Its a bit different here as pretty much all our paddocks...
-
JJX1100U replied to the thread Case puma gearboxes.Use a Puma 180 with full powershift for baling. Get on well with it, generally bale in 10-12. 12-13 is the big change that can be a...
-
-
JJX1100U replied to the thread Kverneland 7640 wrapper proble.We have a 7640 as well, it does love to throw the occasion fit with something being out of position. I'm not much good to you as I...
-
JJX1100U replied to the thread Treating rusty rebar in old concrete framed buildings.We have specified to brush clean the reo and then use Epirez 133, mixed with sand to create a grout/paste, to replace the spalled...
-
JJX1100U replied to the thread Building on filled in ground.That's the standard we use here in Australia, 150mm (6") layers and compaction testing on each layer. If you came to us for a design...
-
JJX1100U replied to the thread Dropping loaders off.Concrete mass block from the local bridge company, weighs about 1.1T. Euro hitch with a few cogged bars welded on and cast into the...
-
-
JJX1100U replied to the thread Claas or valtra.Need to come for a holiday in to Tassie Roy, Valtra are nearly as common as any other brand down here. They seem to suit what people...
-
-
Loading…
-
Loading…
