coulter

I'm always finding the key to a good year being good establishment. This year has been hard with the weather and even with my old fashioned style of plough, cultivate, drill, the spring corn isn't great. More intensive one pass onto plough with a combi could have got timeliness better this year...

Are there different versions of the unit available? Mines due an overhaul, I've been struggling with putting fert through it and I think it's on its limits at 6m wide on the maize drill. I remember a claydon comment years ago saying they use the accord unit but a higher capacity one, do they...

Friend has had a minor opps moment. Could do with a fresh solid 4m bar for 4m combi. Trying the breakers tomorrow. North England. Thanks.

Been thinking of getting one of these for my one pass, I thought it would be handy for working the power harrow more deeply in cobbly bits of soil and then lift out a bit on the finer stuff, all on the move and from the tractor seat. The only thing it might affect the depth and pressure of the...

How many dd guys have gone cultivating? Out next door neighbours practices a full range of cultivating and has 95% crop cover after a hard winter we dd a majority of ours and a currently re drilling 50% .cultivating a fair bit as the top is solid from rain. Any one else feal like abandoning...

It’s been very noticeable this year that later drilled wheat is much better than earlier drilled wheat for spring die off even though conditions were appalling all round. We always thought it was manganese deficiency that caused the problems but I think that’s secondary. Two identical very light...

Looking at using a front mounted seed tank to blow seed to the back of a trailer cultivator (carrier). Has anyone done something like this before? The fact it’s trailed may cause some issues with the pivot point? Plan on using the same front tank with a combination drill and other stuff so would...

4m folding simba free flow asap

Preferably grain and fert must be ready for work. coulter bar and split front tank would be the ideal

Just wondering if there's any further information out yet as to what constitutes no till in the eyes of SFI? Is it a dts/mzuri/claydon direct into stubble? Or is it going to be lower disturbance tine or disc? Supposedly a claydon grain and fert meets the grant spec with the leading tine applying...

Currently running a Weaving GD 6m and I’m finding it difficult to keep the land level due to its impressive ability to not disturb the surface. Just starting in the 3rd year of spring drilling and the fields are definitely becoming corrugated due to wheelings etc. Would like to add a tine drill...

When farming( tenant farmer),a lot of the farms soil was very stony as per pictures attached. Strangely enough I think the Amazone combi drill with Suffolk coulters straight behind the plough press gave us the most even seeding compared to other drills we had, had. Just wondering what drill you...

As above, looking at an 6m Anyone using one ? Are they any good in a DD situation ?

Hello, I have a question about why nobody is using seeders like this in Europe, the UK, or the US, I can't find any seeders like this in those countries, in my country we are using seeders like this a lot almost every seeder are like this with single disc and I'm curious why is nobody using it...

Written by CPM Magazine from CPM Magazine Download PDF Innovation never stands still and with focus moving towards environmentally conscious management, the drill and planter section of the machinery industry is no exception. CPM takes a look at some of the newest products and updates...

What’s the best combi out there, 4 metre or 6 metre folding, mainly heavy land post sugar beet? BB

if no till becomes a sfi option will we be able to claim twice a year ? for instance if doing over winter cover crop then a spring crop just a thought

Morning All Just wondered if anyone has had any expiences with a Dutzi rotavator with legs? Any good as a single pass? Would we be able to put wheat in after maize with one or would it just turn it to S#*t the same as a conventional rotavator as the bledes look different. Also reliabaility and...

Being as its the first of March. I'm sure British Sugar would like us to start drilling.....! Anyone started yet. (We haven't lifted last year's yet🤐) I know @Breckland Boy likes an early beet thread 😉😄

This is written in the hope that it will induce drought like conditions... But anyway, anyone regularly broadcast and harrow spring corn in? I have barley and oats to go in, and the spring tine is going to be the only machine that will go, if it carries on anything like this.. I know, I...