Building Sides & big door

[MRA]

Looking for quotes to clad a building from eaves to floor & for a big door.

60ftx30ftx20ft steel framed building

Looking to put a single 100mm thick concrete panel around the bottom (3 sides, 60ft,60ft&30ft)

Then clad from these to the eaves.

Also fit a door in one 30ft end.. roller shutter or up and over (it is prone to in the path of high winds so roller shutter maybe not the best option?!) size for door probably 20ftx18ft or somewhere around that.

A personnel door alongside the big door would be handy too.


Quote to supply materials & installed please.

Located just south of Bedford

Anything other information needed?


Can email/contact me [email protected]

 

[S J H]

I'm sure Joe mitchinson will be up for quoting Matt.

07590324708

 

[DanielLGQ]

@DanielLGQ for concrete panels.
I will PM you

 

[D.hughes industrial doors]

Looking for quotes to clad a building from eaves to floor & for a big door.

60ftx30ftx20ft steel framed building

Looking to put a single 100mm thick concrete panel around the bottom (3 sides, 60ft,60ft&30ft)

Then clad from these to the eaves.

Also fit a door in one 30ft end.. roller shutter or up and over (it is prone to in the path of high winds so roller shutter maybe not the best option?!) size for door probably 20ftx18ft or somewhere around that.

A personnel door alongside the big door would be handy too.


Quote to supply materials & installed please.

Located just south of Bedford

Anything other information needed?


Can email/contact me [email protected]

Hi Matt, if we was to the doors you would be looking at approximately £2400 & vat for the roller shutter door and £520 & vat for a personnel door both fitted. We would require a scissor lift to install the door which is an extra cost. If you would like a written quote please just let me know. I can also get you a quote for a sectional door if you like?

Thanks lee