Fendt 700 rowcrops.

[Chae1]

380/90r50 and 380/85r34 rowcrops wanted. @ 80" track width

 

[Speedstar]

There is a set in the BLE online sale later in the week

 

[BuskhillFarm]

Local dealer? Or Agrigear ballieborough will make up new and ship to you, they’ll be about the same price for new as most ask for secondhand

 

[Chae1]

There is a set in the BLE online sale later in the week

Is there rowcrops that would fit a Fendt?

I could only see JD ones.

 

[livestock 1]

Peter Shepherd might know where there’s some

 

[Welderloon]

@Chae1 Ross-agri, Netherton, Muiryfaulds, McKay.............. Wellsden possibly?
Rossy or McKay probably best bet to know where a 2nd hand set may be available locally.

 

[Chuckie]

Are 12.4r54 / 12.4r38 too narrow for you?

Set of 4 x row crop wheels to fit Fendt 700 series, 12.4R38 Michelin fronts, 12.4R54 BKT rears | Stephensons Rural Farm Sale - On instruction from Robin Shield Esq due to change in farming policy - Timed online auction - York Auction Centre

Set of 4 x row crop wheels to fit Fendt 700 series, 12.4R38 Michelin fronts, 12.4R54 BKT rears

ylcauctions.co.uk

 

[BRBX]

380/90r50 and 380/85r34 rowcrops wanted. @ 80" track width

380/90R46 380/85 R30?
A mates who's on holiday at moment

 

[Chae1]

380/90R46 380/85 R30?
A mates who's on holiday at moment

Thanks look tidy, I'd rather have 50s for increased ground clearance.

 

[DieselRob]

380/90R46 380/85 R30?
A mates who's on holiday at moment

Won’t your mate be pee'd off when he gets home to find you’ve sold his wheels?

380/90r46 is the same height as 650/65r38 but a 724 will be on r42s so he would loose a lump of ground clearance unfortunately

 

[BRBX]

your not wrong , these were on a 724 for spraying , ok but was a bit tight

 

[GrantMo]

I see a set of R50 row crops off a valmet on Facebook at Brechin, would they fit your fendt @Chae1
Look tidy enough wheels

 

[Chae1]

Does anyone know if front hubs would be same size as Fendt 724?

They've same front axle as 800 series I think.

 

[Speedstar]

Does anyone know if front hubs would be same size as Fendt 724?

They've same front axle as 800 series I think.

Depends on the width you want to have the track width at but some are to close to the fuel tank on 50" rims & it wears a hole in it

 

[Chae1]

Depends on the width you want to have the track width at but some are to close to the fuel tank on 50" rims & it wears a hole in it

Want 80" so be well out.

Discovered today the rear axle hub is exactly same as a lwb New Holland. Put my 900 flotations we used on new Holland on it

 

[Speedstar]

Want 80" so be well out.

Discovered today the rear axle hub is exactly same as a lwb New Holland. Put my 900 flotations we used on new Holland on it

At 72" they do not work.

 

[Will 1594]

@HAM135 has some 50 inch ones

 

[3350turbo]

I'm sure jd 175 to 215 wheels were Same hubs. 10 front 10 back mib wrong.

 

[Spencer]

I see a set of R50 row crops off a valmet on Facebook at Brechin, would they fit your fendt @Chae1
Look tidy enough wheels

Only 8 stud rears, 724 is 10 stud

 

[Chae1]

The most common stud fittings for agricultural machinery

With so many different stud fitting on tractors and trailers, we decided to document the most common hubs on one page. We've included measurements so you

bwt.uk.com

I found this good guide.