Kuhn axis 30 M retrofit isobus

[T C]

Is it possible to get a task controller that replaces the quantron to change the spreader to iso bus.
Just got an iso screened tractor but it won't talk to the spreader.
Got VRA and section control unlocked.
Ideally I would like to still be able to use the spreader as it is.

 

[Norm]

I was supplied with a serial controller to enable my Agleader Integra to talk to the Quantron E. Only works when you select +10% on the QE for some reason

 

[Lofty1984]

I’d like to know the same

 

[Lofty1984]

https://www.homburg-holland.com/uploads/brochures/SmartSOLUTIONS_ENG_DEF_Zonder_snijttekens.pdf smart control

 

[Lofty1984]

Is it possible to get a task controller that replaces the quantron to change the spreader to iso bus.
Just got an iso screened tractor but it won't talk to the spreader.
Got VRA and section control unlocked.
Ideally I would like to still be able to use the spreader as it is.

Which tractor system ?

 

[T C]

Which tractor system ?

Valtra smart touch.

 

[Lofty1984]

Had an agco gps chap out to us the other day we tried getting our kuhn to talk to the fieldstar 5 screen on a mf ended up speaking with kuhn who said it’s not possible unless it’s an isobus machine it can only be done on a Trimble or agleader system, at the moment we have a tractor with a Trimble system which the Quantron is plugged into and the spinner is all run through the Trimble screen for section and vari rate

 

[Richard Smyth]

Had an agco gps chap out to us the other day we tried getting our kuhn to talk to the fieldstar 5 screen on a mf ended up speaking with kuhn who said it’s not possible unless it’s an isobus machine it can only be done on a Trimble or agleader system, at the moment we have a tractor with a Trimble system which the Quantron is plugged into and the spinner is all run through the Trimble screen for section and vari rate

Does the homburg interface not work. It should I just would be surprised if mf know anything about it

 

[Lofty1984]

I’ve no idea I assume it would we haven’t tried tbh probably just wait now and change the spinner in a year or two

 

[Richard Smyth]

Fair enough

 

[Lofty1984]

Fair enough

I would hazard the homberg bit of kit is mega expensive

 

[case44]

I have a Kuhn 4.0W with a Quantron E control box and an Isobus JD,would a Homburg interface work with this and how much does it cost?

 

[Richard Smyth]

I would hazard the homberg bit of kit is mega expensive

Won’t know without asking.

 

[Richard Smyth]

I have a Kuhn 4.0W with a Quantron E control box and an Isobus JD,would a Homburg interface work with this and how much does it cost?

It should do yes. No idea on price but I wouldn’t expect it to be scary but my scary may differ to yours.

 

[Richard Smyth]

If the homburg opened up ability to vra and section control it could very well pay itself off over not many acres

 

[Norm]

I would hazard the homberg bit of kit is mega expensive

I've been informed that it's about 4k

 

[Lofty1984]

Ouch better off changing the spinner