Machinery shopping list

[Roadrunner]

2nd hand new holland 8360 arrived being of the week, but brother managed to take the door off on route to putting it in the shed ....so new door added to the list now!!

New Claas rake on the way and considering renewing the wrapper...should be enough for this year I think.

 

[james ds]

A new pottinger jumbo 6010 combiline wagon and a 10ft mounted pottinger mower/con, a couple of new sets of tyres instead of changing the tractors. replacing an old stone slate roof shed with a new feed store , that should do , oh and a new log splitter.

 

[Dman2]

Think we are going to need anew power harrow this year, Welded the splines up on Machio recently to try and squeeze another year or 2 out of it.
Don`t hold out to much hope

 

[Sid]

Front mower would be handy. Thought the Fella looked ok at AGCO this week. Probably come down to price and deals etc.

mine came down to width

Looking for a tractor for the feeder wagon and pulling the dribblebar on the umbilical.

Fancy this www.gmstephenson.co.uk/tractors/item/476-fendt-395gt-toolcarrier-c-w-24m-mounted-knight-sprayer- but I've already got 2 sprayers.

Also looking for a tidy set of triple mowers or a kuhn alterna or 6210 krone.

Mr Parris at Taunton has a set of triple lelys for sale

 

[dyfxt110]

FL+PTO for the SAME iron, second hand front mower and lime spreader

 

[rhifsaith]

pricing up new kitchens at the mo,that count...

 

[Penmoel]

Done most of my shopping for this year. Purchased 2 ploughs, but need to find a tractor now and possibly a slurry tanker. We shall see.

cart before the horse comes to mind

 

[bigg6480]

A new power harrow and muck grab and second had pickup and 50 more cows is this years plans.

 

[Magnificent Earwig]

6 jd6140r, 2batemans, standen onion harvester, grimme self propelled spud harvester, jd rt due end of year

didn't you have two jd sp sprayers?

 

[fraggle]

New loader tractor should be here this month (valtra N163 direct/vario) been on order since end of November. Looking for a 2nd hand mobile grain drier. Going on how the cows are milking a bigger milk tank and 2nd robot maybe required sooner than anticipated. If I could be sure I'd get as much or more mowing than last year, then I could about justify a 2nd hand front mower.

 

[Blue.]

mine came down to width


Mr Parris at Taunton has a set of triple lelys for sale

Thanks Sid but not a fan of lely mowers.

 

[multi power]

Thanks Sid but not a fan of lely mowers.

cant think why not

 

[Sid]

Thanks Sid but not a fan of lely mowers.

Couple sets on autotrader website too

 

[Blue.]

Couple sets on autotrader website too

A pair of krones without conditioners from a local rough arse contractor.

 

[Sid]

A pair of krones without conditioners from a local rough arse contractor.

Now i know what your replacing lol ;-)

 

[franklin]

Nothing planned. Might swap a solo for a terrano. Would also pick up a 4m rigid unidrill if there was a tidy one available. More likely to sell than buy. Perhaps time to drop one freeflow and the miniflow and have a bit of a clear-out.

 

[Poncherello1976]

Last 12 months - A 1 year old 6480, new cattle crush and a bale handler. Looking for a new mower for this season, and it looks like we are having to replace our tractor loader, (this was not planned!)

 

[Andyrob]

Would love a good 6499 for demo work with the new stuff.

New car, Golf GTD or Astra would be good

 

[mf7480]

. New kuhn plough coming next week purely off the back of the reviews on here, I've not even demo'd one! Might look at changing the backup handler (manitou with 10000 hours) for a new one later in the year.

Looking at getting a new Kuhn plough this autumn,again going off reviews on here.
mf7480 wondered what model plough you have ordered, we are looking at a 5 furrow 153 nsh on lp66 boards and would be interested to know how you find yours if it is a similar model

Have ordered a Kuhn fert spinner[/quote]

I have bought a multi master 123. It's only a shearbolt model as I don't have any stones. I have gone for hydraulic front furrow and hydraulic alignment, big land wheel and lp66 bodies. I also went for a 5f straight instead of a 4+1, it was £1500 extra but hopefully worth it with the bigger headstock and turnover shaft. I'd have loved a vari master but it was £3k extra.

 

[rc mx110]

as of this after noon need a machine to remove handler sized ruts from one of my better grazing fields after the old man decided he could cross it after 3 mths of constant rain.