MF 5445 spotlight wiring

[General-Lee]

Looking to extend when we can go trimming at home, got a led lightbar on the roof on works tractor but don’t think it’ll work for us. I’ve looked behind the indicator bracket and seen 2 sets of spare wires but seem to be dead.

Was amazed fitted a 2nd beacon when we got it and the wiring was present, was wondering if there’s any spot light wires spare hiding?

Tia Lee

 

[Mursal]

If you have a wee look at the little fuse/ relay box diagram, while your waiting on others to reply and see if there are any spare fuse or RELAY sockets listed for work lights.

 

[Bullring]

They can be fitted to 54 series so I'd imagine there must be a spare place for a relay if it's anything like the 64 series.

 

[Farmer_Joe]

those wire should link back to fuse box as said if you add relay and fuse they will become live on switch

 

[dowcow]

Might even be on opposite side of the dash to the fuses. I found some missing relays in mine, tapped into one for 12v to put a USB charging socket in and wondered what it would have been used for. I figured it might have been for front linkage or something that my tractor didn't have.

 

[dee]

You will need to get a small piece of harness, relay and switch to get power to the plugs in your pic. The harness connects in on the r/h side of the dash

 

[General-Lee]

Thanks everyone for your input.

 

[Mursal]

Don't suppose you have a harness lying about, @dee ?

 

[dee]

Don't suppose you have a harness lying about, @dee ?

Sorry no I don't.

 

[ffukedfarmer]

I’ve just put some led lights on the indicator stalk on my 6270. All the wiring was already there, just needed to add a relay under the panel on the left of the dash and a switch, job done

 

[jack_c]

Dragging this back up from the archives, fitted some @UTV Products UTV309 ovals to the handrails on my 5400, wiring is there but does anyone know what harness I need?
Tia

 

[General-Lee]

Dragging this back up from the archives, fitted some @UTV Products UTV309 ovals to the handrails on my 5400, wiring is there but does anyone know what harness I need?
TiaView attachment 790136

Following!

For hedge trimming in the winter I ran a cable down from the cab lights(we only have 2 up there but functioning wiring for 4) as the wiring was there but not live like you by the sounds.

 

[seedman stains]

I bought a harness many moons ago from dobsons it fitted behind the dash.About hr to do,(another relay in the line of relays and a connecting wire behind the dash)

 

[THE411]

Would anyone happen to have a part number or diagram showing the loom required? The dealerships here aren't that helpful, so i need to do the home work before going in.