Mounting front tank on a John deere

[M_Sweet]

Hi all, we have got to set up a front spray tank onto a John Deere 6910, we were thinking of leaving the pipe work on the tractor all the time, and having a couple of short pipes with can locks to connect the tanks, I was just wondering how other people routed the pipes from the rear of the tractor to the front, and any pics of the setup would be great! It's a vicon front and rear setup, needs a 2" and 1.5" hose running between the two. Thanks in advance

 

[Zebbedee]

Just route them where you can not too difficult just keep them away from the exhaust as I melted mine with the heat when drilling not burst just deformed it

 

[Mark C]

Easiest down the RHS chassis rail, route pipes above toolbox and below exhaust , over the air tank ( if fitted') and over axle, up back of cab

Make sure pipes have bungs in when not in use so they don't fill up with dust and mud