Multiple ISO implements

[Clive]

This might be a stupid question !

can you plug x2 ISO machines at the same time on the save tractor ?

ie an ISO front hopper and another ISO machine on the rear ?

If so how do you create the second ISO plug socket ? Can you simply get a splitter cable / adaptor ?

 

[Pheasant Surprise]

This might be a stupid question !

can you plug x2 ISO machines at the same time on the save tractor ?

ie an ISO front hopper and another ISO machine on the rear ?

If so how do you create the second ISO plug socket ? Can you simply get a splitter cable / adaptor ?

Yeah you can get Y-adapters to loop the bus correctly. Couple of places stateside have them online. See if I can find the links.

 

[Pheasant Surprise]

Not cheap. Proper connectors are ££

Ag Express Electronics - Ag Express

Ag Express specializes in electronic repairs, products, and wiring harnesses used in agriculture and other industries.

www.agexpress.com

 

[Mursal]

They might have to be terminated differently to a single unit, those baby resistors are expensive.

 

[Pheasant Surprise]

They might have to be terminated differently to a single unit, those baby resistors are expensive.

I take your pinch of sarcasm there Mursal, but it’s the Deutsch round connectors that are mega money. The termination is typically “self healing” on the external iso socket, it’s an active termination circuit, rather than 120ohm physical resistors, which in itself is actually pretty simple.

 

[Mursal]

Don't suppose you have a typical circuit or even a link? Thanks ......

 

[Pheasant Surprise]

Don't suppose you have a typical circuit or even a link? Thanks ......

There’s a reference circuit, somewhere in the appendix of the standard I believe. May have a copy somewhere on my laptop, I’ll take a look later.

 

[Pheasant Surprise]

Here you go, knock yourself out @Mursal. This from the original 2002 standard. It’s been updated several times since I believe, but not all aspects, e.g. things like the in cab connector got changed in 2006....

 

[Phil P]

This might be a stupid question !

can you plug x2 ISO machines at the same time on the save tractor ?

ie an ISO front hopper and another ISO machine on the rear ?

If so how do you create the second ISO plug socket ? Can you simply get a splitter cable / adaptor ?

Speak to LH, they fitted my front iso socket and T’d it into the rear one.
Wasn’t mega money but they where in the yard doing another job anyway..

 

[Mursal]

Here you go, knock yourself out @Mursal. This from the original 2002 standard. It’s been updated several times since I believe, but not all aspects, e.g. things like the in cab connector got changed in 2006....

View attachment 847096View attachment 847097View attachment 847098View attachment 847099View attachment 847100

Thank you ........... Interesting to compare the above with that running in the cars They run 3 different networks ......

 

[Pheasant Surprise]

Thank you ........... Interesting to compare the above with that running in the cars They run 3 different networks ......

Yeah 3 different CAN buses on the tractor; K-bus, V-bus....and for implements ISObus.