New Holland K80 ball hitch

[NZ SPUD]

Does anyone know where you can get a K80 ball hitch for a SWB T7 New Holland like in picture attached? The only one my NH dealer will supply is one that fits in the ladder hitch frame which I’m not keen on as I’m trying to get the drawbar weight closer the the tractors back axle.

 

[chaffcutter]

Try J H Milne’s, they are uk agents 01226 766251 or Steve 07748114100.

 

[Pheasant Surprise]

As above. Where I get ours from.

Are you trying to source from UK/Europe or closer to home though?

 

[NZ SPUD]

As above. Where I get ours from.

Are you trying to source from UK/Europe or closer to home though?

I have a bit of time so can source from wherever necessary really. The kit just doesn’t seem available through NH NZ. Will try above contact. Thanks.

 

[Pheasant Surprise]

I have a bit of time so can source from wherever necessary really. The kit just doesn’t seem available through NH NZ. Will try above contact. Thanks.

Daylight hours here now, so try his mobile number or email on [email protected]

 

[Richard Smyth]

https://jayben.com.au/

Ring these guys and ask for grant. Was a long time since I spoke to him but we have bought many k80 hitches from them.

The hitch in your picture would be no closer than one dropped into the ladder I’d have thought though.

 

[NZ SPUD]

https://jayben.com.au/

Ring these guys and ask for grant. Was a long time since I spoke to him but we have bought many k80 hitches from them.

The hitch in your picture would be no closer than one dropped into the ladder I’d have thought though.

That’s not a great picture of what I’m after. I just want the ball mounted where the jaws for the drawbar are at the base of ladder. I think that’s the closest I can hope for without going to a European pick-up hitch. The NZ NH ladder ball hitch sticks out anther 250mm from the ladder.

 

[Richard Smyth]

That’s not a great picture of what I’m after. I just want the ball mounted where the jaws for the drawbar are at the base of ladder. I think that’s the closest I can hope for without going to a European pick-up hitch. The NZ NH ladder ball hitch sticks out anther 250mm from the ladder.

Jayben should be able to help. They sell walterschied hitches which put it pretty close to rear of tractor on a jd at least

 

[Richard Smyth]

That’s not a great picture of what I’m after. I just want the ball mounted where the jaws for the drawbar are at the base of ladder. I think that’s the closest I can hope for without going to a European pick-up hitch. The NZ NH ladder ball hitch sticks out anther 250mm from the ladder.

Jayben should be able to help. They sell walterschied hitches which put it pretty close to rear of tractor on a jd at least