Steel Frame Building

second hand steel frame building industrial spec ,120ft long by 65ft wide 24ft to eaves 6deg roof pitch has been taken down with care approx 8 years old all uprights have base plates for holding down bolts, cleat spacings on roof for metal cladding to wide for fibre cement will all go on 1 full artic load £13,000

 

[grass man]

Galvanised? Bay size?

 

[Forever Fendt]

Galvanised? Bay size?

20ft painted

 

[glasshouse]

second hand steel frame building industrial spec ,120ft long by 65ft wide 24ft to eaves 6deg roof pitch has been taken down with care approx 8 years old all uprights have base plates for holding down bolts, cleat spacings on roof for metal cladding to wide for fibre cement will all go on 1 full artic load £13,000

pics?

 

[Forever Fendt]

pics?

its all taken down now and stacked up so not a lot to see,Probably not cheap enough for a straw shed as its ind spec and would make some decent ind space to rent out

 

[Lawless]

What are the steel sizes?
Does it have gable posts, eaves beams/ties, side braces, roof braces, z purlins, side rails?

 

[Forever Fendt]

Structural steel only no purlins (I can supply new if needed) posts 406x178 ,eaves ties 152x152, gable posts 203x203, wall restraint channels 150x75pfc, rafters 305x165 bracings 114mm and 89mm tube base plates 20mm cleats at 1625mm crs Posts are 26ft long so would make 24/25ft to eaves

 

[Lawless]

What condition is the paint in?
Has it had brickwork/mass concrete around the uprights?

 

[Forever Fendt]

What condition is the paint in?
Has it had brickwork/mass concrete around the uprights?

The undercoat is very good (grey) the gloss that will have been applied when it was erected is flaking, (no rust) blockwork between the uprights part way up

 

[Laminated]

Still available?

 

[Forever Fendt]

Still available?

yes