T7.210 gearbox setting

[NZ SPUD]

Had a software update on the Auto Command gearbox on our T7.210 and now every time you start up, the gearbox reverts back to the slowest setting for acceleration/declaration on the 3 position soft key on the armrest. This is very annoying as we usually run it in the 2 green light setting.
Anyone know how to change this pre-set?

 

[fergie35]

Had a software update on the Auto Command gearbox on our T7.210 and now every time you start up, the gearbox reverts back to the slowest setting for acceleration/declaration on the 3 position soft key on the armrest. This is very annoying as we usually run it in the 2 green light setting.
Anyone know how to change this pre-set?

The technician that updated it has the option with his laptop to have it remember the setting or revert to default. You'll have to ask them to alter it, I'm not aware their is a way for the user to do it.

 

[NZ SPUD]

The technician that updated it has the option with his laptop to have it remember the setting or revert to default. You'll have to ask them to alter it, I'm not aware their is a way for the user to do it.

Any prompts for the technician as I got him to double check and he drew a blank!

 

[fergie35]

I'll ask one of our technicians if I remember tomorrow.

 

[NZ SPUD]

I'll ask one of our technicians if I remember tomorrow.

Thanks fergie35

 

[sputnik]

Thanks fergie35

Get the latest software update available. Sorry but cant remember the number but it will solve the problem.

 

[GreaseMonkey]

Get the technician to look on his est under configurations and their is now an option for cvt aggressiveness. Has to be done via that, operated has no access to change that part.

 

[blue power]

It's only a single press of a button or is that to much for you

 

[Curt]

Mine had the software update and now it makes no difference whether 1,2 or 3 lights is on

 

[TripleSix]

Our brand new T7 reverts back to 1 light on restart.

In the manual it says it does this as a safety feature.
So possibly the option to change it is now not available, so you don't hurt yourself!

 

[GreaseMonkey]

Our brand new T7 reverts back to 1 light on restart.

In the manual it says it does this as a safety feature.
So possibly the option to change it is now not available, so you don't hurt yourself!

The option is still there, it just warms the technician there is a danger of injury or death! [emoji51]

 

[mo!]

I hate driving it in 1, there is no engine braking which is much more dangerous. Typical software engineer, upgrade it until it's broke!

 

[Superted820]

My T7 used to do it until software was upgraded again. It was a real hardship that made me contemplate life as I know it, having to push a button!

 

[Bomber101]

My T7 used to do it until software was upgraded again. It was a real hardship that made me contemplate life as I know it, having to push a button!

What software do you have installed now please. I could do with your update but it was updated a few weeks ago and would like to make sure it is current.

 

[blue power]

life is so hard, how did we manage when we had to change gear!should go back to driving a TW again then you won't complain about pressing a button

 

[mo!]

View attachment 397892life is so hard, how did we manage when we had to change gear!should go back to driving a TW again then you won't complain about pressing a button

It's not that it is hard, it is dangerous!

 

[Chippy]

I had same upgrade on my 200 and I also find it annoying that it reverts back to 1 LED light. It changed the way the tractor drove altogether! Did you not find that?
Before update you could cruise along and take foot off accelerator and it would slow down but now the bloody thing carries on going and I've nearly ended up in walls until I finally got used to it

 

[fergie35]

Thanks fergie35

It is as @GreaseMonkey says on the latest software

 

[Superted820]

What software do you have installed now please. I could do with your update but it was updated a few weeks ago and would like to make sure it is current.

Ah it was a little while ago we had an update. I think the latest one stops it but if your dealer is anything like mine if you give them a ring they'll pop out and do it. Hence why I'll be having another new Holland shortly rather than another Fendt!! It's all about the dealer and the service you get and when one's useless......!

 

[Darragh]

Anyone find the range change in these short wheel base a bit of a problem especially when ploughing?